-
ECO2M: Injection under injection-pressure constraint
Hello, I'm running ECO2M to simulate a CO2 injection. Does anyone know if it's possible to simulate the injection under a bottomhole-injection constraint, instead of injection rate constraint?…
-
ECO2M: Halting runs at certain maximum pressure
Hello, I'm running ECO2M and simulating a CO2 injection. I'm interested to see if there is any way I can halt the simulation runs if any of the cells reaches a certain maximum pressure,…
-
ECO2M: Extracting Vector Orientation
Hello, I'm using TOUGH2-ECO2M and interested in extracting the "direction/orientation" of the vector output data (flow of heat, flow of fluid, etc), ideally generated in the same CSV format as in…
-
ECO2M: Meaning of VLIQ at Saq=100%
Hello, I am using TOUGH2-ECO2M, and I have a question about the scalar output parameters “Vliq” and “Vgas”. I’m using PetraSim as the post-processor, and the PetraSim windows shows “Pa-s” as the…
-
Run-time library dependencies
Hey everyone, I’m trying to set up a Docker container, in a Linux like environment, with a TOUGH3 executable in it. When I attempted run the executable, I got a missing library message: .…
-
Display temperature and pressure change in 2D plot
Hi everyone, I am trying to visualize pressure and temperature results for 3D model that has initial pressure and temperature values described by hydrostatic pressure and geothermal temperature…
-
Generation Time Table
Dears, I have this problem while constructing the generation time table using (GENER). I have a table of 5 time-points (rows) which is illustrated below. When I run the code, it crashes.…
-
Parallel processing for EOS7
I am running T3 on Ubuntu. I have successfully ran ECO2M on multiple cores in the past on this server. However, when running EOS7 on the same server, it compiles normally,…
-
How does one track internal progress while the solver is iterating?
The model is taking a long time to run and there is no progress info in the Ubuntu command window. Is there a way to track internal progress? For example,…
-
Non-isothermal solution crashes
I am running a CO2 single injection well into a dipping saline aquifer. The model seems to be running fine in isothermal conditions but crashes when non-isothermal is turned on.…
-
CANNOT FIND PARAMETERS AT ELEMENT *00001*
Hello, The input file I am using does not seem to be reading the INCON block. I am getting the following error: +++++++++ CANNOT FIND PARAMETERS AT ELEMENT *00001* XX(M) = 0.000000E+00 0.…
-
How to identify the cause of an incomplete simulation run
Dears, I have a problem to identify the cause of the incomplete simulation run for the attached input file. The simulation ends before the specified total simulation time without error messages!…
-
Questions about TOUGH3 setup for 3D random permeability fields
Our lab wants to use TOUGH3 for the CO2 storage reservoir simulations of 3D random permeability fields. We are not sure about how to set up the 3D anisotropic permeability correctly in TOUGH3;…
-
How to output viscosity in the output results
Hello every one, I want to know how to output water and CO2 viscosity at every grid block in the output results file. Thanks in advance
-
Infiltration into dry soil
Hello every one, I am new to work with TOUGH3 software. I tried to simulate 1D infiltration into a 1m high column of sandy clay loam with an initial head pressure of -8 m.…
-
Initialization (T2Well)
Hello everyone, I have the following question regarding initialization procedure for simulation using T2Well. I want to simulate the changes at wellhead of a monitoring well that extends to the…
-
T2Well Output
Dears, Can the results obtained from T2Well be output in Excel file format (like TOUGH3)? Thanks in advance
-
TOUGH3; long running time (3D model)
Hi everyone, I am trying to build 3D model for CO2 injection in underground saline aquifer that is upper bounded by impermeable strata which extends to the surface.…
-
gravity-capillary equilibrium in EOS3
hello, I am using EOS3 (TOUGH3-eos3 windows executable) to simulate a gravity capillary equilibrium along a 1-D column but I keep running to convergence failure issue.…
-
How to build windows executable file(.exe) through TOUGH3 code?
I tried to build an executable file by mingw32 on the UBUNTU platform, but I failed.
-
Problem with visualizing material type in ParaView
Hi every one, I have run initialization simulation to obtain initial pressure and temperature conditions that follow hydrostatic pressure gradient and geothermal temperature gradient, respectively.…
-
Visualizing grid blocks
Dears, I have the attached MESH file generated using MESHMAKER. I would like to know if there is a simple Python code that enables me to read and visualize the grid blocks in Pyvista.…
-
Specifying initial conditions for layered reservoir
Dears, I am trying to model CO2 injection in stratified saline aquifer reservoir. I have to provide initial conditions for my model considering hydrostatic pressure gradient and geothermal…
-
Numerical instabilities introduced after printout
I'm running a simulation with intermittent printouts using TOUGH3. I noticed that, after some of those printouts, numerical instabilities are seemingly introduced that stall the remainder of the run.…