-
TOUGH3 installation issue
I realized many people have difficulty in compilation of TOUGH3. After polishing the installation cmake scripts and reorganizing the installation package, compilation of TOUGH3 should be more easy,…
-
error compiling TOUGH3 on Ubuntu : Failed to build TOUGH TPLS
Hi All, I tried to compile TOUGH3 on a new server with Ubuntu 20.04 but not successful. (Please refer to the error.png for error screenshot). I have all dependencies installed and their versions…
-
How to visualize the results in OUTPUT_ELEME in 2D plot
Dears, I would like to know if it it is possible to visualize the results obtained in OUTPUT_ELEME excel file using toughio in 2D plot. Thanks in advance
-
Compiling TOUGH3 on Linux platform (Ubuntu): Failed to configure TOUGH TPLS
I tried to compile TOUGH3 eos7ca, but the following error message showed up. I changed PETSC_VERSION_PATCH 6 to PETSC_VERSION_PATCH 4 and deleted /esd-tough3/build and /esd-tough3/tough3-install…
-
How to read and visualize MESH file using PyVista
I have created a Cartesian grid model using Mesh Maker which is given the attached MESH file. How to read MESH file and visualize the grid model using PyVista?
-
Format of INCON and SAVE file
Hi, I am trying to capture the block status (perm, poro, pressure etc). In the previous TOUGH2 or TOUGHREACT, the INCON or SAVE file could contain the perm, porosity, and pressure,…
-
Coupled reservoir-wellbore model initialization (using T2Well)
Hello everyone, I have started using T2Well to simulate coupled reservoir-wellbore problems recently. While initializing the numerical model, I find the following problem;…
-
Error compiling TOUGH3
Hello, I am trying to compile TOUGH3 in Ubuntu (Windows subsystem for Linux 2), ./complie_T3_Linux.sh 1 I get an error message "Script ERROR: Failed to build TOUGH TPLS" at "Performing configure…
-
Installing Tough3 on Windows by using Bash
Hello! I am trying to install T3 on my Windows10 by using bash but this error comes up (please see the attached image). Apparently it's because the file name: " blas2.1.…
-
Output the spatial results for specific layer
Dears, I would like to know if there is a specific way to print out the results (spatial results at a specified time) for a specific layer of grid cells.…
-
How to build windows executable file(.exe) through TOUGH3 code?
I tried to build an executable file by mingw32 on the UBUNTU platform, but I failed.
-
Problem with visualizing material type in ParaView
Hi every one, I have run initialization simulation to obtain initial pressure and temperature conditions that follow hydrostatic pressure gradient and geothermal temperature gradient, respectively.…
-
TOUGH3; Running time is too long
Dears, I am trying to run a simulation using 2D model for CO2 injection in stratified reservoir. I have 650 grid cells in the radial direction and 79 grid cells in the z-direction as illustrated…
-
Problem with running the sample (r2dl) using TOUGH3/TMVOC
Hi, everyone, I had been using TOUGH2 family code. Recently, I began to use TOUGH3, particularly using TMVOC module for my research. I firstly tested the Problem No.…
-
Parallel execution of simulation using TOUGH3 in windows
Dears, I am trying to run a simulation case using TOUGH3/ECO2 in windows and the simulation run lasts for a long time (more than 24 hr for numerical model 1650*10 grid blocks).…
-
TOUGH3 installation on PC updates: Install Ubuntu Terminal and then install TOUGH3
If the operating system is Windows 10, a better option than Cygwin is Ubuntu Terminal. Updated instruction for TOUGH3 installation on Ubuntu Terminal can be found here (Installation File,…
-
TOUGH3 output and ext2
Hello all, I am using the famous ext2.exe file to extract data from TOUGH3-eos3 output file but it is not working (although it works perfectly fine with my TOUGH2 outputs).…
-
Questions about TOUGH3 setup for 3D random permeability fields
Our lab wants to use TOUGH3 for the CO2 storage reservoir simulations of 3D random permeability fields. We are not sure about how to set up the 3D anisotropic permeability correctly in TOUGH3;…
-
Display temperature and pressure change in 2D plot
Hi everyone, I am trying to visualize pressure and temperature results for 3D model that has initial pressure and temperature values described by hydrostatic pressure and geothermal temperature…
-
termination criterion following two time steps for which convergence on ITER = 1
Hello, It looks like I am running into this exact issues described on page 44 of the T3 user manual (copied below). What suggestions do you have when this occurs?…
-
T2Well (Error message)
Dears, I got the following error message in the output file while running T2Well case. Array size for connections is not enough: NCON= 243220 but MNCON= 57000…
-
How to identify the cause of an incomplete simulation run
Dears, I have a problem to identify the cause of the incomplete simulation run for the attached input file. The simulation ends before the specified total simulation time without error messages!…
-
T2Well in TOUGH3?
Hi, I was just wondering if TOUGH3 can be run with T2Well? I have previously modelled boreholes with two feed zones (inlet and outlet) in the T2Well/EOS1 research code modified by Dr Lehua Pan which…
-
TOUGH3 on PC: CPU timing routine
I recently used Ubuntu terminal to install TOUGH3 on a Windows 10 Laptop. In order to compile, I had to change a call to the CPU timing routine. In the esd-toughlib source code, file parallel_stubs.…
-
TOUGH-3 Parallel compile on Windows 10 / Ubuntu terminal
Hi All, Has anyone managed to compile TOUGH3 in PARALLEL on Windows 10 with Ubuntu Terminal? I have followed Curt's instructions and managed to compile in serial (i.e.…