-
Radial heat transfer with MOP(15)=5
I plan to simulate fluid flow in a discretized wellbore (discretized with volume elements on a radial mesh) using ECO2M with heat transfer between wellbore and the surrounding formation.…
-
Run T2Well in Parallel Mode
Hi everyone, I am using T2Well to run simulation case for a coupled wellbore reservoir system. The model consists of 25000 grid cells. The simulation case considers different processes including…
-
Increase time step size?
Hello, I am working on modeling the flow of CO2 and H2O in the hydrothermal system of a volcano using ECO2N V2. My eventual end goal is to have a cylindrical mesh (depth of 4.…
-
Setting atmospheric, impermeable, and adiabatic boundary conditions
Hello, I’m working on modeling the flow of CO2 and water into a hydrothermal system using EOS2. I want to set the top boundary to atmospheric conditions and the side and bottom boundaries to…
-
TOUGH3-failure in linear solution
Hello I am currently modeling on TOUGH3 CO2 injection in a 3D grid and the reservoir of interest has a dome-like shape with 4000 elements. It's taking about three hours to complete a full run,…
-
MPI_Allreduce error
I am getting this error (see picture attached) while running EWASP with 16 cores. Any thought as to what's going on? Thank you in advance for your help.
-
Efficient time stepping with great variability in pumping/shutin period durations
Dear colleagues, I am history matching a pumping test that consists of two 3day flow periods each followed by a 10d shutin periods. The flow rates were not constant during the pumping periods and…
-
AZ_calc_blk_diag_inv: ERROR: the factorization has produced a singular U with U[2][2] being exactly zero.
I am running a 3D TOUGH3 model with EOS7C and the AZTEC parallel iterative solver. Occasionally I receive this error that ends my model run, and the OUTPUT file gives me no clues as to what is going…
-
Access violation
Hi I encountered following error. Has anyone experienced this and if so how did it get resolved?
-
COM2 injection with eco2m eos
I have not been able to find any documentation on how brine injection is handled when using eco2m. NaCl is COM2 in the GENER block. I would assume that salt mass fraction of the brine would be part…
-
Compressibility On/Off in ECO2M
Hello folks, I posted a similar thread on TOUGH2, but here in TOUGH3, there seems to be an option under MOP2 where we can turn on/off the effect of compressibility on porosities.…
-
Values <1.0E-100 included in SAVE file with improper formatting.
When running with tough3-eos3, we noticed that there were some values for air mass fraction (X2) that were below 1.0E-100, but the "E" was not included.…
-
T2Well (modeling nozzle/Plug in wellbore)
Hi everyone, I have question about ROCKS data block in T2Well. According to the manual, the domain of grid cells that start with "x" indicates wellbore cells filled with porous medium or consisting…
-
Columns Headings in COFT (T2Well)
Hi, In the manual of T2Well, five variables should be obtained in COFT file. While using T2Well, I find seven outputs per connection without titles. Can anyone help me to identify the output…
-
OUTPUT File Size
Hello, Does anyone know if it's possible to reduce the size the OUTPUT file by not printing the same information printed in the CSV/PetraSim/Tecplot file? For example,…
-
How does one track internal progress while the solver is iterating?
The model is taking a long time to run and there is no progress info in the Ubuntu command window. Is there a way to track internal progress? For example,…
-
How to output viscosity in the output results
Hello every one, I want to know how to output water and CO2 viscosity at every grid block in the output results file. Thanks in advance
-
Infiltration into dry soil
Hello every one, I am new to work with TOUGH3 software. I tried to simulate 1D infiltration into a 1m high column of sandy clay loam with an initial head pressure of -8 m.…
-
Initialization (T2Well)
Hello everyone, I have the following question regarding initialization procedure for simulation using T2Well. I want to simulate the changes at wellhead of a monitoring well that extends to the…
-
Numerical instabilities introduced after printout
I'm running a simulation with intermittent printouts using TOUGH3. I noticed that, after some of those printouts, numerical instabilities are seemingly introduced that stall the remainder of the run.…
-
Compiling against more up to date PETSC version
Hi All, Just a question regarding compiling TOUGH3 against a PETSC versions higher than the 3.7 branch. Has anyone tried this? Is it possible? I know at some stage a number of the PETSC function…
-
TOUGH-3 Parallel compile on Windows 10 / Ubuntu terminal
Hi All, Has anyone managed to compile TOUGH3 in PARALLEL on Windows 10 with Ubuntu Terminal? I have followed Curt's instructions and managed to compile in serial (i.e.…
-
TOUGH2Matlab
Dears, I would like to know if TOUGH2Matlab can be used to post-process the results obtained using TOUGH3. I have tried to use TOUGH2Matlab to read the MESH and OUTPUT files obtained using TOUGH3,…
-
INCON format in the *203t ECO2n samples
In the samples for Tough3 ECO2n, there are several cases whose name ends in 203t where the INCON keyword looks strange to me. For each element, there are 6 lines for the values of the primary…