-
Parallel Output in TOUGH-3
Good Morning, I have recently started to experiment with using TOUGH-3 in parallel. When I output the simulation variables in CSV format, it seems to print certain parts of the simulation grid twice…
-
Output the spatial results for specific layer
Dears, I would like to know if there is a specific way to print out the results (spatial results at a specified time) for a specific layer of grid cells.…
-
EOS7r incompatible with mesh
I am a toddler in using TOUGH, I have generated mesh using gmsh converted to tough by toughio. The output file does not indicate a major flaw. I really appreciate it if an expert can spare some time…
-
termination criterion following two time steps for which convergence on ITER = 1
Hello, It looks like I am running into this exact issues described on page 44 of the T3 user manual (copied below). What suggestions do you have when this occurs?…
-
TOUGH3-EOS7-diffusion
Hello, I am trying to model a salt intrusion in a confined aquifer using TOUGH3 and EO7, following Henry's problem. I am defining initial conditions (with multi 2 2 2 8:…
-
Drastic fluctuation of pressure vs. time curve
Hi, I simulated a simple model with EOS1, but I got a strange pressure vs. time curve. What may causes the curve fluctuation? The ground water velocity is 10-7 m/s, the production rate is 150 m3/h.…
-
Values <1.0E-100 included in SAVE file with improper formatting.
When running with tough3-eos3, we noticed that there were some values for air mass fraction (X2) that were below 1.0E-100, but the "E" was not included.…
-
Output results of specific grid versus time
Hi everyone, I wonder if there is a code to extract the output results of a specific grid cell in OUTPUT_ELEM file versus time. Thanks in advance
-
T2Well (modeling nozzle/Plug in wellbore)
Hi everyone, I have question about ROCKS data block in T2Well. According to the manual, the domain of grid cells that start with "x" indicates wellbore cells filled with porous medium or consisting…
-
How to visualize the results in OUTPUT_ELEME in 2D plot
Dears, I would like to know if it it is possible to visualize the results obtained in OUTPUT_ELEME excel file using toughio in 2D plot. Thanks in advance
-
Columns Headings in COFT (T2Well)
Hi, In the manual of T2Well, five variables should be obtained in COFT file. While using T2Well, I find seven outputs per connection without titles. Can anyone help me to identify the output…
-
OUTPUT File Size
Hello, Does anyone know if it's possible to reduce the size the OUTPUT file by not printing the same information printed in the CSV/PetraSim/Tecplot file? For example,…
-
Mesh Generation in T2Well
Hi, I am a new user of T2Well/ECO2N. I want to start building my model by creating mesh using Meshmaker. In TOUGH3, I am used to using the following execution procedure to build mesh: 1.…
-
T2Well in TOUGH3?
Hi, I was just wondering if TOUGH3 can be run with T2Well? I have previously modelled boreholes with two feed zones (inlet and outlet) in the T2Well/EOS1 research code modified by Dr Lehua Pan which…
-
ECO2M: Automatic switch in injection constraint
Hello, I'm running ECO2M to simulate a CO2 injection. If it's possible to inject the CO2 under a pressure/BHP constraint, would it be then possible to simulate the injection initially under…
-
ECO2M: Injection under injection-pressure constraint
Hello, I'm running ECO2M to simulate a CO2 injection. Does anyone know if it's possible to simulate the injection under a bottomhole-injection constraint, instead of injection rate constraint?…
-
ECO2M: Halting runs at certain maximum pressure
Hello, I'm running ECO2M and simulating a CO2 injection. I'm interested to see if there is any way I can halt the simulation runs if any of the cells reaches a certain maximum pressure,…
-
ECO2M: Extracting Vector Orientation
Hello, I'm using TOUGH2-ECO2M and interested in extracting the "direction/orientation" of the vector output data (flow of heat, flow of fluid, etc), ideally generated in the same CSV format as in…
-
ECO2M: Meaning of VLIQ at Saq=100%
Hello, I am using TOUGH2-ECO2M, and I have a question about the scalar output parameters “Vliq” and “Vgas”. I’m using PetraSim as the post-processor, and the PetraSim windows shows “Pa-s” as the…
-
Run-time library dependencies
Hey everyone, I’m trying to set up a Docker container, in a Linux like environment, with a TOUGH3 executable in it. When I attempted run the executable, I got a missing library message: .…
-
Display temperature and pressure change in 2D plot
Hi everyone, I am trying to visualize pressure and temperature results for 3D model that has initial pressure and temperature values described by hydrostatic pressure and geothermal temperature…
-
Generation Time Table
Dears, I have this problem while constructing the generation time table using (GENER). I have a table of 5 time-points (rows) which is illustrated below. When I run the code, it crashes.…
-
Parallel processing for EOS7
I am running T3 on Ubuntu. I have successfully ran ECO2M on multiple cores in the past on this server. However, when running EOS7 on the same server, it compiles normally,…
-
How does one track internal progress while the solver is iterating?
The model is taking a long time to run and there is no progress info in the Ubuntu command window. Is there a way to track internal progress? For example,…