-
STIMAX parameter: Which ionic strength is considered?
Dear all, I have a question concerning the STIMAX parameter in the solute.inp file in record 3. As described in the TOUGHREACT V3.0 manual, STIMAX acts as:…
-
EOS7C tracer phase
Hi All, In EOS7C, what phase is the tracer in at injection? I have defined a Henry's constant, but presumably that takes effect after injection. Also, how can I see output for tracer in the liquid…
-
MGTAB
Hi I am trying to run a domain containing numerous generation sources (>1000). I have faced an error about the number of generation sources. I searched for "MGTAB" in source codes and I found in…
-
Error message help
Hi Everyone, I am not sure I ask this question in the right forum. I am testing the Tough3 EOS1 with Minc. The cell number is about 0.4 million including the MINC element.…
-
heterogeneity
Hi, i need to build an heterogenic filed (mean that kx and ky will be different in every cell). it is possible to do with TOUGH2? Thanks you, Evyatar.
-
Tough2-Flac Coupler
Hi, I was wondering if Tough2-Flac couple module is available to public? if yes where can I download it? Thanks, Attila
-
"Default porosity" definition
Hi everyone, Just a quick post to ask a simple question: is the "default porosity" POR in ROCKS the total porosity? For instance, total porosity for clay formations is, in general, about 40-50%.…
-
Tough2-MP TMVOC module
Hi, has anyone run TMVOC module with Tough2-MP successfully? Our current project has big area and needs fine mesh in pay zone, plus the MINC natural fractures,…
-
Installing T2 and iT2
Hey everyone, My colleague and I recently purchased T2 and iT2 through our University, however we both kinda suck at installing programs etc ... can anyone help us?!…
-
Viscosity of a pure VOC - Error in the formula
Hi everyone, A quick post just for you to note that the formula (4.3.12) in the TMVOC user's manual is not correct. It should be written : ln(µ) = A + B/T + C*T + D*T*T instead of ln(µ) = A - B/T +…
-
Injecting Hot Upflow with MINC
I am running a natural state geothermal model and running into the following issue: With a single-porosity model, the upflow condition is hot water injected, about 290 C.…
-
Axis rotation
Hi everyone. I want to rotate my axis from y to z. Now I have an input file where my domain is in x-y (constant width as z direction), but gravity is in z direction.…
-
T2VOC for simulating Air Sparging under changing injection rates.
Hi, I would like to use T2VOC to model air sparging in saturated soil, to simulate the effect of change in injection rate on two things: (1) ROI (radii of influence);…
-
problem with initiatal conditions eos3 diffusion of water vapor in water in unsaturated soil layer
Dear moderators in my problem i have to solve the diffusion of water vapor in water in unsaturated zone attached are the input file and mesh file i could not find the problem even i tried for long…
-
error message when using EXT.exe
Hello TOUGH users and specially Stefan, I need to export TOUGH2 results to Tecplot. I used EXT.exe but afte 6 timesteps this error message appears: forrt 1: severe <64> input conversion error,…
-
XAIRL in volume element with no liquid phase
Hello TOUGH users! I am simulating a simple diffusion problem with EOS3. In my model, I have a volume element which is fully saturated with air and the rest of volume elements are fully saturated…
-
Help with defining basic Confined and Unconfined Aquifer and transport models
Hello All, I am brand new to PetraSim and have been trying to learn to make basic models of confined and unconfined aquifers, model advection-dispersion,…
-
TOUGH2 and TOUGHReact Compatible MacOS
Hello, I am using both T2 and TReact on my Mac using OS X Mavericks 10.9.5. Are either compatible with the new Yosemite OS? I had downloaded it and wanted to install but do not want to have to…
-
Boundary water
Hi all, I'm modeling CO2 underground injection and we are injection a mixture of brine and supercritical CO2. Under the system pressure and temperature and the injection rates,…
-
Making input file
Hi all I am pretty new to TOUGH code and my domain problem is trapezoid. Actually, it is hard for me to make my input file boundary in notepad manually.…
-
iTOUGH2-GSLIB grid definition and mapping
Hi. I am using iTOUGH2-GSLIB to generate spatially correlated permeability field. It seems that in case the GSLIB and TOUGH2 grid have different resolutions,…
-
Using MINC to represent groundwater flow in fractured porous media
Hello, I am investigating whether TOUGH2 will enable better characterisation of groundwater flow than more basic, single porosity packages like MODFLOW.…
-
Post processing software
Hi, I have to ask that after running itough2 software successfully there is one file created tecfile, on which software i can open that file for 3D view as post processing?…
-
How to do inclined layer in block ROCK?
How to do inclined layer in block ROCK?
-
Numerical Methods and Meshing Strategies
Hello, I am writing a research paper on different reservoir simulators in the market today. For the TOUGH simulators, I would like to get more information about the numerical methods that are used…