-
toughio
Dears, I want to read the file SAVE output from tough+hydrate through the toughio library, but the code runs all the time and fails. How can I solve this problem? Thanks in advance
-
A question about the additional mechanism under the Minerals entry in the chemistry.inp file
Dear All, Hello everyone! I just started learning toughreact software. At the moment, I am a bit confused about the description of the additional mechanism under the Minerals entry in the chemistry.…
-
ECO2M: Automatic switch in injection constraint
Hello, I'm running ECO2M to simulate a CO2 injection. If it's possible to inject the CO2 under a pressure/BHP constraint, would it be then possible to simulate the injection initially under…
-
Display temperature and pressure change in 2D plot
Hi everyone, I am trying to visualize pressure and temperature results for 3D model that has initial pressure and temperature values described by hydrostatic pressure and geothermal temperature…
-
Temperature limits of various ECO2N versions
Hi Folks, Anybody can send me a few words on this: We have a version of ECO2N (as a part of iTough2.7.0.) which doesn't perform with T>103.4, same indication seen in CO2Tab data that is limited to…
-
The order of ELEME and CONNE will influence computation results
I used to think that ELEME and CONNE can be arranged in arbitrary order as long as the blocks provide same information, but recently I found changing the order of ELEME and CONNE can significantly…
-
Sequestered mass of CO2 not calculated/printed out by ECO2N
Hi there, I'm having a look at the example P5_eco2n (TOUGHREACT v332), on CO2 geological sequestration. To my surprise, the sequestered CO2 (output variable 'SmCO2') appears to be zero regardless of…
-
Looking for training sessions of Toughreact using Petrasim
Hi Everyone, I am new user of TR and I have research project that investigates CCS in Kazakhstan. Since the project can cover the training expenses, I would like to ask if anyone can explain how to…
-
injecting VOC mass through virtual cells
Hi everyone, I am trying to simulate a 1D diffusion scenario where the domain is a column comprised of 200 grid cells (domain is 1m*1m*20m with 200 cells in z-direction) and every grid cell has been…
-
Material balance in TOUGH-FLAC
Hello, I have a question regarding the material balance in TOUGH-FLAC coupling. Let's say that I originally had a porosity obtained from TOUGH as 0.3, and then after the FLAC calculation,…
-
set different diffusion coefficient for different layer
As far as I know, only one solute diffusion coefficient can be set for all aqueous species,which is not practical. Is it possible to set different diffusion coefficient of one solute for different…
-
Specifying initial conditions for layered reservoir
Dears, I am trying to model CO2 injection in stratified saline aquifer reservoir. I have to provide initial conditions for my model considering hydrostatic pressure gradient and geothermal…
-
Large runlog.out file
Hi I am having problems with large runlog.out files causing my disk size to get full quickly. I have made sure that the parameters responsible for this in REACT block are not made greater than zero…
-
Two time steps with restart gives different results than one without restart
Hello, Do you know why a restart during 6 hours (for example) after one time step (6 hours for example) is different from one time step of 12 hours? In my simulation with eos4,…
-
toughio added
toughio is an open-source library that provides tools to facilitate pre- and post-processing for TOUGH using the latest Python standards. It aims to make setting up of a TOUGH simulation…
-
How to improve the stability of the numerical results without changing the grid discretization ?
Dears, I have the following simulation case for CO2 injection in stratified aquifer using 2D grid model. I have slight fluctuations in the pressure results.…
-
Encounter problems using TMT2
I use TMT2 transform between GMS & TOUGH2 coded by Andrea. Got some problems: "*.ghb" is used for reading constant-head elements. However, I do not get "*.ghb" after "Export Native MF2K text...…
-
representing an oven using extra cell
Hi everyone, I’m trying to use TOUGH2 to history match a column test where some soil was put inside a glass column and sealed and then put the column itself inside an oven set at some elevated…
-
Questions on NAPL volatile and dissolution
Hello everyone and Stefan, I have several questions on NAPL volatile and dissolution into water. Based on the manual, volatile is controlled by temperature,…
-
libgcc-s-dw2-1.dll & libgfortran-3.dll
I want to run executable file for Tough2 EOS7CA. I receive the following error messages: "The code execution cannot proceed because libgcc-s-dw2-1.dll was not found.…
-
assigning the right enthalpy
Hi All, I'm running a thermal simulation using TMVOC where I'm also including a mass rate at the second layer beneath the atmospheric boundary layer. The mass rate represents annual precipitation.…
-
TOUGH-FLAC coupling
Hi, I am trying to use a coupled TOUGH-FLAC simulation on a reservoir model. I am just starting with a simple 'cube' model with uniform properties. I went through some of the works done by Jonny…
-
How to inject CO2 using eos2
Hi. I want to inject CO2 of 1000 ton/day and H2O of 2400 ton/day into model domain (1.5* 10 km) using EOS2. Following advice in https://tough.forumbee.…
-
Actually, I need a software I could model the Coupling Thermo-Hydro-Mechanical damage.
I was wondering if this software(TOUGH2) is suit for this purpose or not. please let me know if you have any more information in this area.Thanks