-
OUTPT section
I use cubes to construct an octahedron prism. The cross-section shape is shown in the attachment. The largest distance in three directions is 41, 41, 291. How do I write the OUTPT section? Thanks!
-
Defining Tortuosity
How to insert the tortuosity in Petrasim software?
-
TReactMech Simulator!
Hello, I am working on CCS research. I am wondering if the TReactMech simulator is available. I have seen it in papers, but can't find it the on LBNL marketplace. Please advise! Thanks. Nicholas
-
Training
Is there any training for tough2 or tough3 for beginners?
-
Training
Hi all, Is there any training in UK or online for beginners as I need to get to use Tough2 and add Flac3d to it later
-
Radial heat transfer with MOP(15)=5
I plan to simulate fluid flow in a discretized wellbore (discretized with volume elements on a radial mesh) using ECO2M with heat transfer between wellbore and the surrounding formation.…
-
van Genuchten - Mualem model
I am reviewing the RPCAP keyword with the G-M model (7). There are recurring terms Sl, Slr, and Sgr that are not defined in the User Manual. I understand "irreducible water saturation" is Slr.…
-
The problem of using toughio to process input files
Hello Here is a test input file that can run normally(r2dl1). But when I use toughio to read and write, the output file(r2dl1_new) cannot be executed correctly. parameters = toughio.…
-
ECO2N: question about the VOLUME- AND MASS-BALANCES information in '.out ' file
Hi guys, As we can see in the 'out' file of eco2n, there is an information named VOLUME- AND MASS-BALANCES in the '.out' file. I don't know what HEAT stands for, is it internal energy or enthalpy?
-
OUTPUT FLOW between rock domain
Hello, is it possible with iTOUGH to output the total flow between one rock domain to another at each time step (like CONNE between two elements)?
-
Facing problem to match TOUGH output with excel and Python
Dear TOUGH community, Recently I am conducting 1-D stead-state radial heat conduction problem The result I got from PetraSim(TOUGH) could not match with the result from excel or python,…
-
Best approach to modelling multiphase fluid flow of clay fines in a saturated silty sand media
Hi All, Is there a program within the TOUGH family that is suitable for modelling slurry injection within a saturated silty sand media. Kind regards, Rob
-
Coming This SEPTEMBER 18-20: LBNL's TOUGH Symposium (and Short Courses)
**Coming This SEPTEMBER 18-20: LBNL's TENTH TOUGH Symposium (& Short Courses) (See Schedule)** Symposium will be In-person at Lawrence Berkeley National Laboratory.…
-
Multiple questions regarding data entry for a surface complexation problem
Hi there, I am working on a coal combustion product (CCP) leachate project. The goal is to understand the natural attenuation and reversibility for some remediation drivers at CCP sites,…
-
time range in GENER and PARAM
Hi All, The time steps shrinks to E-07 near the end of simulation period. I found this message in the OUTPUT file. QQQQQQQQQQ SUBROUTINE QU QQQQQQQQQQQ --- [KCYC,ITER] = [1452, 1] 0.…
-
Restart time in inchem file is not the same as starting time in INCON - 1D Radial CO2 injection - Problem 5
Hello, I removed the GENER block from the flow.inp file in order to run an equilibration simulation for 10,000 years. I then wanted to use the 10,000th year data to be used as my initial conditions…
-
Proppant transport
Dear all, what is the best way to simulate proppant transport in Tough2 or 3? Thanks, P.
-
How to remove grid cells from simulation
Hi everyone, I am working on 3 dimensional model that includes injection well, leaky well, injection zone, cap strata, and shallow aquifer. I am using T2Well to run the simulation.…
-
1D advection-diffusion problem ( velocity input)
I am using PetraSim 2018 so I can use only TOUGH (not TOUGH2) and TOUGHRECAT I try to solve 1D advection-diffusion problem where water velocity is require as an input value Please suggest me how…
-
Run T2Well in Parallel Mode
Hi everyone, I am using T2Well to run simulation case for a coupled wellbore reservoir system. The model consists of 25000 grid cells. The simulation case considers different processes including…
-
parallel mode runs with 2 processors but not more than 2
Hello, I am running a restart model (eos7c module) in parallel mode. However, it does not run well with more than 2 processors. I wonder if anyone else has experienced this? Thanks, Haiyan
-
ECO2N / ECO2M: handling of wettability in a dry zone
Hi folks, When exposing the initially brine-filled grid cells near injection point to CO2 injection, a dry zone is established. At a certain condition of flow and rock properties water saturation…
-
How to monitor the temperature change of the sink with time?
Hi gays, I'm trying to simulate plume geothermal systems using toughreact. I want to output the temperature change of the sink at each time step, but I don't know how to set it.…
-
GMS complex mesh to tough2 error in result
dear all, i have a complex structural model created with gms, and when i use gms export mesh to tough2 option, the resulted mesh does not contain the angle of gravity and cell connections,…
-
Error in reading INCON - Problem 5, eco2n_1D Radial
Hello, In problem 5, eco2n_1D Radial, I am using the input files provided (flow, solute, chemical, CO2TAB, .dat, and executable) to run a q=0 kg/s flow in order to find the equilibrium conditions…