-
Scientific format of numbers in TOUGH2 input file
Hi. I just experienced some strange behavior when trying to run 1D gravity equilibrium for ECO2N module with TOUGH2-MP for test case 4 (rtp7). I used the following ROCKS block in the input file…
-
Defining ِDirichlet / Neumann boundary conditions in ECO2N
Hello I am trying to define different types of boundary conditions in TOUGH2 with ECO2N module to see the effect of B.C on the simulation. I think the TOUGH2 code simulates Neumann conditions by…
-
simulating diffusion process in long time (near equilibrium) with TOUGH2
Hi! I am trying to simulate a simple diffusion poblem with TOUGH2. I am using EOS3, I can't get any results for long term (near equilibrium time which is in my problem around 80 days).…
-
Signal SIGSEGV: Segmentation fault
Dear all, I just encountered following error while executing a TOUGH-ECO2M sample problem: Program received signal SIGSEGV: Segmentation fault - invalid memory reference.…
-
Error Message - out of range in SATB
My simulation of injecting co2 into a homogeneous reservoir using eco2n stops with the error message: +++++++++ REDUCE TIME STEP AT ( 50, 1) ++++++++++++++++ NEW DELT = 0.…
-
How to copy paste text data into T2VOC fortran77?
Hi my name is Asni from Malaysia. Recently, I have buy the T2VOC for my master study under Universiti Teknologi Malaysia grant. Im new to the T2VOC and fortran77.…
-
Do you need to make a vertical fault with real geology in it?
If you need to add a vertical fault with real fault geology, that is a fault plain with material that changes from place to place, you may use the simple attached procedure to modify your GMS…
-
TMT2: GMS file format? Amount of cells in y?
Hi all, I am working on converting a Visual Modflow generated mesh and flow field into a TOUGHREACT simulation. It looks like Visual Modflow files have a slightly different formatting than the…
-
EOS4???????? linking between soil water contents and water vapor pressure in a thick unsaturated zone
Dear Stefan and other moderators please i really need your help to figure out what is the best EOS i have to consider the water vapor diffusion and its effects on the water contents with the time in…
-
time step control
Hi! Is there any way to make a simulation going on even if convergance occured on the first itteration for 10 time steps in a row ?
-
error message during compiling eos4
Dear Stefan iam trying to compile eos4 following the same steps mentioned in the manual and read me file using comaq compiler fortran 6.5 the file are ma28.f t2cg2.f meshm.f t2f.f eos4.f t2solv.…
-
need help using EXT.exe
Hello all, I want to visualize TOUGH2 results, using Tecplot. So I tried to convert TOUGH2 output file to input file for Tecplot. After some time steps, this error appears> forrt 1:…
-
Defining a set of grid block boundaries in radial direction in TOUGH2-ECO2M
Dear all, I am trying to define several radial distances in my model domain to see the brine influx and gas saturation at several radial boundaries around the injection well.…
-
Incompressible flow
Dear all, I would like to consider the incompressible flow of the mixture CO2-brine in a heterogeneous reservoir. Are there any ways to fixe the density of brine and CO2 in TOUGH2?…
-
1d tough2 problem
hi my task is to use tough2 to do 1D simulation in a 10 m thick of unsaturated zone from above the model is objected to precipitation and evapotranspiration so i have a long time serie of weather…
-
initial condition in EOS3 for volume elements with zero gas saturation
in a model I am working with, at initial condition all volume elements are fully saturated with water, and there is only one element which is fully saturated with air.…
-
why the SAVE disk file is empty even i have no error message when i run the input file
hi all, i am learning tough 2 i found some training courses and tried to exercise i am interested in a Sample Problem 2DVZ: Infiltration Test in the Vadose Zone i tried to write the input file when…
-
run time error M6201:math
Hi! Can anybody help we with this error. (error message is in the attached picture) I changed my 1D model from horizontal to vertical and this error comes out during running the new input file.
-
Diffusion coeficient
hallo could any one tell me frome where can i get the diffusion coefficients for gas and water phases to be used inside the tough2 input file thanks in advance rima
-
what is the suitable EOS ?
Hello, I am a very beginner using TOUGH2 i will use it to simulate the water flow the vapour transport and the heat transpot in a vadose zone in semi arid region what is the suiltable EOS nimber is…
-
Well Connection
Hello. I am a student and relatively new to TOUGH2. I am trying to create a model with a series of six boreholes, each containing a u-tube shaped pipe and all the pipes are connected along the…
-
Why a simulation with "same" input file once runs and once crashes?
I made an input file which worked properly. I just added data block FOFT, and I recieved error by running that. I deleted data block FOFT but with the same input file which previously had worked…
-
One question on outputting flow rate of aqueous VOC through COFT
Hello everyone, I have a question on outputting flow rate of aqueous VOC through COFT. I established a control plane in my model and want to simulate mass discharge through the control plane.…
-
Need help on using Ext.exe to generate Tecplot input file
Hello everyone and Stefan, I tried to use Ext.exe to generate Tecplot input files, but it can not work by following the steps in the manual. Attached is my model output and mesh files.…
-
Whether can TOUGH2 be used to simulate DNAPL spill (non volatile) in the vadose zone (non volatile oil, water and air phases)?
Hello everyone, I am trying to find a simulator that can simulate DNAPL spill in the vadose zone. The DNAPL is not volatile, but it can be dissolve into water.…