-
Making input file
Hi all I am pretty new to TOUGH code and my domain problem is trapezoid. Actually, it is hard for me to make my input file boundary in notepad manually.…
-
Suggestion in change the GENER
Hi, Dear all, I want to add a feature about delaying / shutting the production well with wellbore deliverability modulue. The manual said the production well with wellbore deliverability can not be…
-
Do you have a recommended module to simulation gas condensate reservoir?
It's a deep gas condensate reservoir, what's module is good for it? What about EOS7C? Thank you very much
-
MINC to simulate dual-porosity reservoir, with some fractures are open, some are closed.
I'm using MINC to simulate dual-porosity reservoir, since I assume some fractures are open, some are closed, could I assign different permeability or porosity to fracture elements based on…
-
Time stepping in dry-out zones
Hello all, I know it is a general question, but any hint will be appreciated. I am running a 3D model of CO2 injection into a layered aquifer using the ECO2N module.…
-
How to switch between injection well to production well (time dependent)
Hi, Everyone, I am a PhD student. I need some urgent help in the TOUGH2. I wan to switch the well properties between the injection well and the production well during the simulation.…
-
Total No. of Aq. Complexes
Hi Everyone, I just found from an error message that there is a default limitation for maximum number of aqueous complexes to be used in the TOUGHREACT simulation i.e 70.…
-
Problems precipitating phases at high ionic strengh using trpitz_v1.21
Hello everybody, I am working on a geothermal application and I try to model halite precipitation during the cooling of a brine in a borehole. Even when the brine is oversaturated by far with…
-
TOUGH2 and TOUGHReact Compatible MacOS
Hello, I am using both T2 and TReact on my Mac using OS X Mavericks 10.9.5. Are either compatible with the new Yosemite OS? I had downloaded it and wanted to install but do not want to have to…
-
iTOUGH2-GSLIB grid definition and mapping
Hi. I am using iTOUGH2-GSLIB to generate spatially correlated permeability field. It seems that in case the GSLIB and TOUGH2 grid have different resolutions,…
-
Can T2VOC simulate different grid increment ?
Can T2VOC simulate different grid increment ? For example, x= 0.1, 0.4, 0.5, y = 0.1, z=0.2, 0.3, 0.6. I found it does not run as usual.
-
Mole fraction in each phase
I am confused with term mole fraction in TMVOC output file. I think the total of mole fractions in each phase in one element should equal to 1. But, many output sample in TMVOC manual doesn't show…
-
Using MINC to represent groundwater flow in fractured porous media
Hello, I am investigating whether TOUGH2 will enable better characterisation of groundwater flow than more basic, single porosity packages like MODFLOW.…
-
TOUGH2 post processing program in MATLAB with TMVOC
Hi everyone, I am currently using the TOUGH2 post processing program in Matlab by Antonio Rinaldi for TMVOC files. The READ_DATA function does not work when the command 'Compute Flow' is active.…
-
Hi everybody, I have a question regarding a particular simulation (I am using Petrasim). Can you help me?
Hi everybody, I have a question regarding a particular simulation (I am using Petrasim). Can you help me? I am trying to simulate the heat and fluid flow within a volcanic edifice.…
-
Help with defining basic Confined and Unconfined Aquifer and transport models
Hello All, I am brand new to PetraSim and have been trying to learn to make basic models of confined and unconfined aquifers, model advection-dispersion,…
-
Post processing software
Hi, I have to ask that after running itough2 software successfully there is one file created tecfile, on which software i can open that file for 3D view as post processing?…
-
How to do inclined layer in block ROCK?
How to do inclined layer in block ROCK?
-
CHEMP.5 Record for new chemicals
Hi everyone, I am trying to add new chemicals in the CHEMP block but I have some difficulties with the CHEMP.5 record, i.e. about the ideal gas heat capacity constants.…
-
Steam injection about TMVOC
Hi everyone : I am trying to model the steam injection remediation I have a question about the steam injection rate. My inject point is 5.5m below free water level When I use “0.…
-
Timestep problems while including O2(g) in calculations (V3-OMP / ECO2N)
Hello everybody, I have found the next problem for you to resolve :-). I am using Toughreact V3.0-OMP, but the problem would appear with V2, too, I assume.…
-
Visualize TOUGH2/EOS7C output file
Hello everyone, What's the best way to visualize TOUGH2/EOS7C output file? I am wondering if anyone works with "TOUGH2Matlab"? or any other suggestions to visualize my results.. Thanks Sara
-
Is my result correct? My first time doing simulation with multiple layer of soil.
Hi everyone. This is my first time doing simulation with multiple layer of soil Previously I did with only one type of soil for 1m x 1m x 0.1m size of model, the result seem ok.…