-
How to create the following grid structure
Hello everyone, I would like to know if TOUGH3 /MESHMAKER has the capability of creating the following grid structure. In this structure, number of grids in one layer is different than the above and…
-
General question about Capillary Pressure
In terms of flow I still struggle to understand the reasons/use of having capillary pressure as an option in ROCKS. How different is flow when it is disabled?…
-
constant injection pressure
Hi all, I would like to simulate 1D soil grouting with chemical injection material. I'm using iTOUGH2 with EOS-GEL module. I have a constant injection pressure and wants to determine development of…
-
Error when use MESHMAKER to generate XYZ mesh in TOUGHREACT ECO2N sample problem
Hello dear, I am trying to learn the ECO2N module in TOUGHREACT, so I began at the sample Problem 5 – 1-D Radial Model for CO2 Sequestration in a Deep Saline Formation.…
-
Tough+Hydrate Model Initialization to Steady state : Pressure gradient appears but Temperature gradient disappears
Hello Everyone. I am trying to run the model to steady state. I have a 190 x 1000 model. I fixed the top boundary to 6.5C and 104bar by making the cells inactive I set simulation end time to (10,…
-
TOUGH3-FLAC3D time step setting
Hi, I am trying to couple TOUGH3 and FLAC3Dv7.0 through python scripting engine built in FLAC3D software. I am confused about the time step control after reading some published papers (e.g.…
-
GOFT
Hi all, I'm experiencing an issue with the use of the GOFT keyword under Tough3. I don't manage to obtain the GOFT output files, and have no reason why.…
-
Ask : MP function at petrasim 2018
Hello everyone.. im a college student & new petrasim-tough2 user i want to ask how to activated MP function when we want to running model using petrasim 2018?…
-
Mesh Creation
Hi everyone. I recently started learning ToughReact. I’m trying to learn Mesh creation from scratch and how to create a 1D or 2D mesh. how to I go about this? What resources are available?
-
Pressure reporting: Tgh2-ECO2M
Hello ECO2M users, It is about pressure reporting of Tough2 when running a 1D radial model initialized with only water, flooded by CO2 at Its center using ECO2M. I get the following curves.…
-
representing an oven using extra cell
Hi everyone, I’m trying to use TOUGH2 to history match a column test where some soil was put inside a glass column and sealed and then put the column itself inside an oven set at some elevated…
-
Problem running TOUGHREACT in Petrasim
Hi, I am new to TOUGHREACT. I set up a simulation with material properties and other parameters. Created MESH. However, TOUGHREACT Halts Simulation prematurely with an error message "MESHMAKER HAS…
-
van Genuchten - Mualem model
I am reviewing the RPCAP keyword with the G-M model (7). There are recurring terms Sl, Slr, and Sgr that are not defined in the User Manual. I understand "irreducible water saturation" is Slr.…
-
TOGA released for licensing
TOGA released for licensing. TOGA (TOUGH Oil, Gas, Aqueous) is a numerical reservoir simulator for modeling non-isothermal flow and transport of water, CO<sub>2</sub>, multicomponent oil,…
-
EOS3-sink/source rates are piecewise constant, how to set up?
As mentioned in the title, I want to set the piecewise constant sink/source rate as shown in the attached figure, but I can't achieve the desired result after setting it many times in petrasim,…
-
No convergence in NSIN at - non-isothermal simulation T2WELL/ECO2N
Dear TOUGH community users, I am trying to simulate CO2 injection using T2WELL/ECO2N. In the model, the grid is radial and both wellbore and reservoir are initially fully saturated with water X3=0.…
-
TOUGHREACT-EOS2 - non-congergence- injection of H2O and CO2
Hey everyone, I need help to solve a problem in my input file, please. I run into a problem with an input file which I have been using for different simulations already and which worked fine.…
-
need help in using Ext.exe
Hi all, I'm having some trouble extracting the data from the OUT file generated by TOUGH2 using Ext.exe. My grid number is 19220 and connection number is 55459,…
-
Calculating Total Heat Generated in an Area
Dear all, I am working with TOUGH2 Landfill Bioreactor Model (T2LBM) to simulate a biological reaction in my domain which stimulates by injecting oxygen.…
-
call TOUGH in jupyter notebook and PyTOUGH
Hi All, I am using PyTOUGH to automate TOUGH simulation. However, when I try to call TOUGH in Jupyter notebook with this command subprocess.call(["path_to_my_tough3_executable(tough3-eos1)",…
-
Web application toughio-dash released to public
Hello, The web application I developed to pre-process TOUGH input files has been released to the public and can be accessed via: https://toughio-dash.lbl.…
-
TOUGH3; long running time (3D model)
Hi everyone, I am trying to build 3D model for CO2 injection in underground saline aquifer that is upper bounded by impermeable strata which extends to the surface.…
-
radial grid visualization pytough
Dear TOUGH community, I have a radial grid in PyTOUGH and would like to visualize it. Is that possible? I have been searching and only found examples on rectangular grids with the function geo =…
-
Using TOUGH ECO2N for Core flooding
Hi all, I am curious to know if TOUGH2 is able to model a core flooding. Suppose that there is a core sample of length 30 CM. I have tried, however my simulation didn't converge.…
-
Cross flow between stacked layers
Dears, Is there is a way in TOUGH3 to output mass flow rate between stacked layers (NOT grid cells) with time?