-
Beginner
Hello everyone, I just got Petrasim+Tough2 licence from work but I have no idea where to start and how to start. I have noone around to ask and no experience with other simulators either.…
-
Fortran runtime error!!
Hi, I am running a model with EOS7C on UNIX. The code seems working with no convergence error. But, I always get: Fortran runtime error: Expected REAL for item 14 in formatted transfer,…
-
mesh creation
I have a question regarding mesh creation. I am working with Petrasim, T2VOC. I appreciate if you could help me. Is there any limitation for creating mesh?…
-
What if the model does't have boundary setting?
Hallow everyone! I'm a beginner of TOUGH. All the time, i always use the dirichlet boundary by giving a 1E50 volume. Today, an idea come to me : What if the model does't have any boundary settings?…
-
Error in EXT.exe
Dear team, I encountered an error when using the EXT.exe. I have completed the simulation by Petrasim. But, the CMD indicated that ' forrt1: severe (161) : Program Exception - array bounds exceeded'.…
-
Modeling of flow of bitumen in porous media
Dear all, I want to model the shaft seal of repository in clay. The shaft seal consists of bentonite plugs and gravel column filled with bitumen. The goal of modeling is to investigate the behavior…
-
Initial/boundary conditions for discharge from spring (ECO2N)
Hello, I am trying to use ECO2N to model a system where salty, CO2-rich water is upwelling into a shallow freshwater aquifer that is horizontal for some distance,…
-
How to simulate a tide boundary?
Hello, everyone, I am a new TOUGH2 user. I want to creat a model using EOS3 module. The left boundary of the model is a water-land interface. The mean sea level is assumed to be 6m below the ground…
-
TOUGH-FLAC coupling
Hi, I am trying to use a coupled TOUGH-FLAC simulation on a reservoir model. I am just starting with a simple 'cube' model with uniform properties. I went through some of the works done by Jonny…
-
libgcc-s-dw2-1.dll & libgfortran-3.dll
I want to run executable file for Tough2 EOS7CA. I receive the following error messages: "The code execution cannot proceed because libgcc-s-dw2-1.dll was not found.…
-
Mesh Maker 1.5 3d/2d MESH VISULAIZATION
Can any body cooment on whether, its possible to visualize the mesh you have created using Mesh Maker 1.5 can be visualized using any software? plz tell guys,…
-
anisotropic permeability for TOUGH3-EOS7
Dear all, I am trying to modify my INFILE (isotropic permeability) to specify anisotropic permeability element-by-element. My original INFILE (isotropic permeability cases,…
-
T2Well questions
Hi there, Starting to play around with T2Well and having good fun. ;) Two things (at least) that I didn't understood: 1- ROCKS data block: the domain name for wellbore cells starting with 'x'.…
-
ECO2N, Model initial temperature distribution
Dear all members, Hi, I'm working on thermal injection simulation in TOUGH2 and I want to define an initial temperature distribution for my model. After program execution (ECO2N),…
-
Effective or Total Porosity in TOUGH2 EOS1
Migrated from Rockware Support Forum: Does TOUGH2 EOS1 assume total porosity or effective porosity for water? Is there a built-in conversion from one to the other?
-
Big alternating in/out fluxes along sloped water table boundary
Hello, I am using iTOUGH2-ECO2N to investigate upwelling of CO2-laden brine into a shallow aquifer system, but I am having a problem with the initialization of the flow model and would appreciate…
-
Error in defining Heterogeneous Regions with Meshmaker 1.5
Hi everybody, I have a question about geometry definition in meshmaker. I tried to define a very simple layered material by using meshmaker 1.5, and I tried to define the layers by heterogeneous…
-
ECO2N permeability modification
Hi all, I have a question about random permeability modification using ECO2N. When I include a SEED dummy domain in ROCKS and use input parameters for logarithmic permeability modification,…
-
TOUGH2 code compiled with IVF(based on VS circumstance)
Hello,everyone! I have some question about compile TOUGH2 code. I have two fortran compiler,but I can only compile TOUGH2 code follow the suggest giving in https://tough.forumbee.…
-
Wettability and capillary pressure direction in TOUGH2
Previous discussions indicate that the direction for Pc is always "pulling" the wetting component toward lower saturation regions. Does TOUGH assume the aqueous phase is always the wetting phase ?…
-
The relationship between S_l and P_cap is not consistent with the van Genuchten function
Hi, I am using ECO2N for simulating CO2 storage. I wanted to verify that the relationship between the liquid saturation, S_l, and the capillary pressure, P_cap,…
-
Maximum MCYC
Hi. Although I set MCYC (maximum number of time steps) to more than 1000, TOUGH2 calculation stops at KCYC=1000. Is maximum value of MCYC 1000 ? (This is not described in TOUGH2 manual...…
-
Is there a limit of injection rate that an element can accept?
Hi, I am running a 2-D planar, unidirectional flow with injection and production at both ends (actually, simulating an aquifer). But I found if I increase the injection rate more than a certain…
-
For a same drainage process, why ECO2N with hysteresis modeling and ECO2N without hysteresis modeling have very different results?
I studied the reservoir response to different injection processes. To just test the simulators' capability, I used TOUGH2-ECO2N with the hysteretic capillary pressure and relative permeability…
-
water, vapor and heat coupled modeling in 2D/3D
Hello all, Is TOUGH3 able to couple water, vapor and heat transfer in a 2 or 3 dimensional unsaturated zone model? I mean to do 2D/3D vapor transport modeling in semi-arid region with a atmosphere…