-
How to assign the material properties to mesh (ELEM block)
Hi everyone, I need to assign the material properties to mesh elements into the ELEME block. In the EOS7R sample there is the MESH_MatNum file in which the material properties are already been…
-
No Temperature change in iTOUGH2 forward model run, problems with atmospheric blocks
Hi Stefan, I currently have a couple of issues when running iTOUGH2 in forward mode, especially when trying to add topography (done using PyTOUGH). Often my outputs will simulate fluid flow and…
-
Debugging
Hello I am running a problem and the simulation was halted at the middle of simulation. Here is the text that I found in the output file. How can I figure out and fix the problem?…
-
iTOUGH2 EOS7 Compilation
Hello when compiling iTOUGH2 (linux) with EOS7 the iTOUGH2 manual indicates that the variables MAXK and MAXEQ within maxsize.inc should be set to 3 and 4 to allow for upto three components and 4…
-
use of MINC file in subsequent simulations
Dear all, I want to create a MINC file and use it in subsequent flow simulations. However, if I put the MESH and MINC file in the relevant folder, the simulation only uses the MESH file.…
-
Cooling cell
Hello and thanks for maintaining this forum, very useful indeed. I am running a variation of the 5 spot problem in Toughreact. Essentially this is a polygonal mesh and there is a 10 meter high…
-
STIMAX parameter: Which ionic strength is considered?
Dear all, I have a question concerning the STIMAX parameter in the solute.inp file in record 3. As described in the TOUGHREACT V3.0 manual, STIMAX acts as:…
-
Is there a limitation in the number of grid blocks to be printed out?
Hi- I ran two simulations with different number of grid blocks to be printed out in 'time.out' The first case with 10 grid blocks had no problem at all but the other one with 100 blocks encountered…
-
EOS7C tracer phase
Hi All, In EOS7C, what phase is the tracer in at injection? I have defined a Henry's constant, but presumably that takes effect after injection. Also, how can I see output for tracer in the liquid…
-
(ECO2N)CANNOT FIND PARAMETERS AT ELEMENT * *, for help
Hi,dear all, I'm here agian. I was puzzled by a question for a long time, I appreciate anybody can provide some suggestion. I have attached my input file, MESH,INCON,and the output file,…
-
No show of SAVE and savechem files in restart option
Hi, I am running TOUGHREACT though, I think it's also applicable to TOUGH2 users. I am trying to use restart option, but I can't find those two output files (SAVE,…
-
EOS3 bug?
When I run the input attached I receive the error below. I do not have a number 466560 anywhere in the input file. When I debug the source code, temperature 27.0 becomes 46656000027.…
-
"EOS CANNOT FIND PARAMETERS AT ELEMENT" error message
Hi, dear all I'm working on geothermal model by using TOUGH2 with PetraSim. Now I had generated input file from PetraSim (0114.dat) and recompile the eos1.exe file.…
-
Oxidation extension
Hi all What are the possible ways to add oxidation extension to TMVOC? Is there any available code like TMVOCbio? Thank you
-
How to handle time step control for proper chemistry computation?
Dear all, I am struggling with some Toughreact basics and maybe some of you can explain me shortly how to handle the time step control in a proper way to avoid mistakes and miscalculations.…
-
MGTAB
Hi I am trying to run a domain containing numerous generation sources (>1000). I have faced an error about the number of generation sources. I searched for "MGTAB" in source codes and I found in…
-
TOUGH2-MP
Hello everybody, so I've successfully compiled TOUGH2-MP and decided to test it in the r1dv example files. I always get a segmentation fault error. Specifically I get the following message: [terra:…
-
Error message help
Hi Everyone, I am not sure I ask this question in the right forum. I am testing the Tough3 EOS1 with Minc. The cell number is about 0.4 million including the MINC element.…
-
TOUGH2-MP compilation error
Hello everybody, My research centre has a version of TOUGH2-MP and we are trying to install it with ECO2N eos in the cluster: Cluster: Rocks Cluster Operating System: Cent OS -> (2.6.32-220.13.1.el6.…
-
EOS7C-running problem
Hi everyone, I am doing a simulation with EOS7C in the heterogeneous coal seam aquifer with water and gas extraction from the well located in the middle of the model.…
-
restart with surface complexation
Hello, I have been trying to run a restart with surface complexation. First, I get an error like that: "Restart time in INCHEM file is not the same as starting time for flow calculations. timetot= 3.…
-
EOS7C pressure range
Hi there, I read through both the tough2 and EOS7C manuals to find the pressure range limitation to run simulations, but I didn't find it. I have a abnormal high pressure reservoir,…
-
Cauchy/Type III Boundary Condition
Hello, Is it possible to apply a head dependent boundary condition, where flux is a function of head difference between a cell and some prescribed value?…
-
Capillary Pressure Definition
In TMVOC, is the capillary pressure between two phases i and j: Pc_ij = Pi - Pj or Pc_ij = Pj - Pi ? where Pi and Pj are the pressures in the phases i and j. Thank you in advance, Quentin
-
TOUGH 2 ECO2M temperature condition
Hi, It is described in the ECO2M user guide that TOUGH2 simulates CO2 migration under temperature condition up to 110 °C. I am wondering if the temperature condition is about 115 °C-125 °C,…