-
tecplot see my output files for loading
How can the plot_data_element file and other be loaded into tecplot pls?
-
Relative permeability curves in tough2
Hello Every one I faced problem with the relative permeability curve while I working with tough2.1 to build a 3D reservor model for CO2 storage by using both the source code and also the petrasim…
-
Output flux of aqueous species
I would like to output the flux of all aqueous species across specified connections. Is this possible? I am using TR3.32. Thanks, Heather
-
LINEQ
I am trying to model chemistry reactions in porous media. To build the model from the base, I run the case without injection/production or any chemistry reaction. From the flow.out, the MAX.…
-
A question about coupling TOUGH2 and FLAC3D
I have read many articles about coupling TOUGH2 and FLAC3D, most of them said FLAC can calculation the effective stress and strain after reading the data from TOUGH such as pore-pressure.…
-
CO2 injection in a depleted oil field
Hello, what module do you recommend for the simulation of CO2 injection in a depleted oil field? Some examples would also be helpful.
-
Error compiling TOUGH3
Hello, I am trying to compile TOUGH3 in Ubuntu (Windows subsystem for Linux 2), ./complie_T3_Linux.sh 1 I get an error message "Script ERROR: Failed to build TOUGH TPLS" at "Performing configure…
-
Volume and Mass Balance Error in flow.out
Hello, everyone. I am using EWASG model to simulate chemical reaction (Ba+2 + SO4-2 = BaSO4) in porous media. Although I define the initial water and assign it to the matrix,…
-
Gridblocks to represent sink and source
Hello all. I want to assign two vertical wells (137 layers) at the opposite end of my I dimension. I am stuck getting error messages trying to use GENER block’s NAD and NADS.…
-
Postprocessing example error using triangulate
Hello guys, I was trying Postprocessing examples from samples in TOUGH3 (rcc3, co2qthermal) for any mesh file using "postproc_triangulate.py", and it was giving this error. please help!