-
How to simulate mixed gas injection with Toughreact v1.2
Hi I am trying to develop a model that is used to simulate a mixed gas to inject into a formation, and then get a gas-water- rock reaction model. The mixed gas includes CO2 and H2S and H2.…
-
T2Well
Hi I am trying to model the temperature distribution in the wellbore during CO2 injection. In the TOUGH3 manual, I find that T2Well can evaluate pressure and temperature profile within the wellbore.…
-
use ENDFI to create mesh before initializing simulation , but how??? tried several combinations.....Mesh file remains empty
😥 hello everyone, I am using TOUGH+Hydrate v 1.5 I bought it from LBNL(executable only) I think, that for mesh creation, ENDFI must be put in place of ENDCY now running this, creates mesh file,…
-
GSLIB+Anisotropy permeability
Hi, I am trying to create a permeability realization field using GSLIB in iTOUGH2. I set permeability in 3 directions in ROCKS, with an anisotropy ratio of 3 in GSLIB block.…
-
Unable to download BLAS when installing TOUGH3 on a Linux platform
An error of failing download BLAS consistently happened when I was trying to install TOUGH2 on a Linux platform. The err.log said ' downloading 'http://www.netlib.org/blas/blas2.1.tgz' failed'.…
-
Facing problem to match TOUGH output with excel and Python
Dear TOUGH community, Recently I am conducting 1-D stead-state radial heat conduction problem The result I got from PetraSim(TOUGH) could not match with the result from excel or python,…
-
"ITERATION ON SOLUBILITY FAILED" in restart
Hi All, I am running TOUGH3 EOS7C for gas production and want to restart the simulation after some time. I rename the SAVE file as INCON (keep the +++ lines as I want to continue with time scale)…
-
Pore Compressibility in ECO2M
Hi guys, I have a 3D cartesian model where I assign constant porosity across all elements in the model. In TOUGH2, I think we can assign only a constant value of pore compressibility.…
-
injecting VOC mass through virtual cells
Hi everyone, I am trying to simulate a 1D diffusion scenario where the domain is a column comprised of 200 grid cells (domain is 1m*1m*20m with 200 cells in z-direction) and every grid cell has been…
-
Temperature limit
Hi everyone, I am trying to model thermal condutive heating in unsaturated soil and I need the temperature to get above 500 degrees C after water dries out.…
-
How to improve the stability of the numerical results without changing the grid discretization ?
Dears, I have the following simulation case for CO2 injection in stratified aquifer using 2D grid model. I have slight fluctuations in the pressure results.…
-
What is the popular way to visualize 3D results from TOUGHREACT
Hi, I have unstructured grid created by GMSH, what is the popular way to visualize 3D results from TOUGHREACT I tried TOUGHIO, but it won't read my flow.out properly
-
Permeability (I) for a 2D cylindrical model
Hi, I have a query regarding initializing anistropic permeability in ROCKS for a 2D cylindrical geometry model. In the 3D case it is quite clear that PERM(I); i =1,2,3 stand for permeability in x,y,…
-
TOUGHREACT/ECO2N:CANNOT FIND PARAMETERS AT ELEMENT * 1*
Hi Everyone, I'm new at using ECO2N of TOUGHREACT. And the following problem is encountered when I used PetraSim to simulate. It's a simple model. And I model a strata from -2260m to -2900m below…
-
EOS7c and NCG injection
Dear all, I am using EOS7c module, to model the injection of a NCG (either CO2 or N2) in a depleted CH4 reservoir. As soon as the mass fraction of the non-condensible gas X_NCG_G approaches 1 (i.e.…
-
Pressure-dependent Neumann Boundary condition
Dear all, Dose anyone know how to set up a pressure-dependent Neumann Boundary condition in TOUGH2? Like evaporation problem, how can I set up the evaporation amount (in GENER block) as a function…
-
GMS complex mesh to tough2 error in result
dear all, i have a complex structural model created with gms, and when i use gms export mesh to tough2 option, the resulted mesh does not contain the angle of gravity and cell connections,…
-
Initialization (T2Well)
Hello everyone, I have the following question regarding initialization procedure for simulation using T2Well. I want to simulate the changes at wellhead of a monitoring well that extends to the…
-
TOUGH2Matlab
Dears, I would like to know if TOUGH2Matlab can be used to post-process the results obtained using TOUGH3. I have tried to use TOUGH2Matlab to read the MESH and OUTPUT files obtained using TOUGH3,…
-
CO2TAB in ECO2N
Hello to everyone ! I would like to model CO2 injection into high temperature and high pressure EGS reservoir. I know that by default, ECO2N has limitations on maximum allowed temperature throught…
-
Mobility concept in TOUGH (Parameter MOP(11) )
Hi dear group, I hope this wouldn’t be a silly question I am working with an unsaturated column composed of sandstone and mudstone layers. As first step (and using EOS9),…
-
Question on DELV control
Hi again ! I have a question about the use of the Deliverability well control : What is the parameter HG in the GENER keyword used for ? What happens when it's defaulted ? (HG thickness of layer, m;…
-
Specifying an injection well with a constant volumetric rate
Dears, I wonder if it is possible to define an injection well with a constant bottom hole injection rate (volumetric rate NOT mass rate) in TOUGH3/ECO2N using the GENER data block.…
-
In-situ Combustion for Oil and Gas
Hi everyone, My company is considering to get a TOUGH license and wondering if it is suitable for our project. I am wondering if we can use it for in-situ combustion for oil and gas extraction.…