-
MPI_Allreduce error
I am getting this error (see picture attached) while running EWASP with 16 cores. Any thought as to what's going on? Thank you in advance for your help.
-
GOFT
Hi all, I'm experiencing an issue with the use of the GOFT keyword under Tough3. I don't manage to obtain the GOFT output files, and have no reason why.…
-
Problem with running the sample (r2dl) using TOUGH3/TMVOC
Hi, everyone, I had been using TOUGH2 family code. Recently, I began to use TOUGH3, particularly using TMVOC module for my research. I firstly tested the Problem No.…
-
Efficient time stepping with great variability in pumping/shutin period durations
Dear colleagues, I am history matching a pumping test that consists of two 3day flow periods each followed by a 10d shutin periods. The flow rates were not constant during the pumping periods and…
-
At KCYC=1, EXCEED GENERATION TIME TABLE AT ELEMENT #####
I was hoping someone would be able to help me troubleshoot this issue. I'm running EOS7C in TOUGH3. This is my OUTPUT file explanation of the error. CYCIT .......... KC = 1 KCYC = 1 DELT = 0.…
-
EOS7c and NCG injection
Dear all, I am using EOS7c module, to model the injection of a NCG (either CO2 or N2) in a depleted CH4 reservoir. As soon as the mass fraction of the non-condensible gas X_NCG_G approaches 1 (i.e.…
-
AZ_calc_blk_diag_inv: ERROR: the factorization has produced a singular U with U[2][2] being exactly zero.
I am running a 3D TOUGH3 model with EOS7C and the AZTEC parallel iterative solver. Occasionally I receive this error that ends my model run, and the OUTPUT file gives me no clues as to what is going…
-
Infinite Acting Aquifer
I have a TOUGH3 model (EOS7C) that is showing signs that the model extent is not wide enough in the East and South directions (pressures increasing over time).…
-
Access violation
Hi I encountered following error. Has anyone experienced this and if so how did it get resolved?
-
Time-Dependent Material Properties
Hello, Is there a way to implement time-dependent material properties (block ROCKS) in TOUGH3? I am interested in assigning time varying permeabilities (prescribed as a function of time).…
-
eco2m Fortran runtime error
I have been getting the following error when beginning a TOUGH3 run using the eco2m eos: TOUGH STATUS: Total preprocessing time = 17.409522771835327 At line 3180 of file…
-
COM2 injection with eco2m eos
I have not been able to find any documentation on how brine injection is handled when using eco2m. NaCl is COM2 in the GENER block. I would assume that salt mass fraction of the brine would be part…
-
Can TOUGH3 model temperature below zero degree?
Hi All, I am new to TOUGH and plan to use it in modeling a borehole thermal energy storage system. However, the ground temperature surrounding the system may drop to below zero degree.…
-
creating T2Well .exe from source code
Hi, I have access to a T2Well and TOUGH3 license and would like to have a go at generating the executable from the T2Well source code. I can see in the T2Well/ECO2N manual that there is an NMAKE…
-
Compressibility On/Off in ECO2M
Hello folks, I posted a similar thread on TOUGH2, but here in TOUGH3, there seems to be an option under MOP2 where we can turn on/off the effect of compressibility on porosities.…
-
Parallel Output in TOUGH-3
Good Morning, I have recently started to experiment with using TOUGH-3 in parallel. When I output the simulation variables in CSV format, it seems to print certain parts of the simulation grid twice…
-
Output the spatial results for specific layer
Dears, I would like to know if there is a specific way to print out the results (spatial results at a specified time) for a specific layer of grid cells.…
-
EOS7r incompatible with mesh
I am a toddler in using TOUGH, I have generated mesh using gmsh converted to tough by toughio. The output file does not indicate a major flaw. I really appreciate it if an expert can spare some time…
-
termination criterion following two time steps for which convergence on ITER = 1
Hello, It looks like I am running into this exact issues described on page 44 of the T3 user manual (copied below). What suggestions do you have when this occurs?…
-
TOUGH3-EOS7-diffusion
Hello, I am trying to model a salt intrusion in a confined aquifer using TOUGH3 and EO7, following Henry's problem. I am defining initial conditions (with multi 2 2 2 8:…
-
Drastic fluctuation of pressure vs. time curve
Hi, I simulated a simple model with EOS1, but I got a strange pressure vs. time curve. What may causes the curve fluctuation? The ground water velocity is 10-7 m/s, the production rate is 150 m3/h.…
-
Values <1.0E-100 included in SAVE file with improper formatting.
When running with tough3-eos3, we noticed that there were some values for air mass fraction (X2) that were below 1.0E-100, but the "E" was not included.…
-
Output results of specific grid versus time
Hi everyone, I wonder if there is a code to extract the output results of a specific grid cell in OUTPUT_ELEM file versus time. Thanks in advance
-
T2Well (modeling nozzle/Plug in wellbore)
Hi everyone, I have question about ROCKS data block in T2Well. According to the manual, the domain of grid cells that start with "x" indicates wellbore cells filled with porous medium or consisting…
-
How to visualize the results in OUTPUT_ELEME in 2D plot
Dears, I would like to know if it it is possible to visualize the results obtained in OUTPUT_ELEME excel file using toughio in 2D plot. Thanks in advance