-
TOUGH2-MP : simulations halted after 1 day simulations
Hi every body, I'm using TOUGH2-MP version 2.01 Under Linux (Debian). I've did some changes in the code and compile it without any problem (named later as testv2.1).…
-
TOUGH Workshop 2021
Is tough training planned this year?
-
About TOUGH+HYDRATE
Hello, I have a question about TOUGH+HYDRATE(T+H). I want to run cartesian model(gird : 57x57x61(total about 200000). But T+H doesn't operate, and I get the following error message on the terminal:…
-
toughio
Dears, I want to read the file SAVE output from tough+hydrate through the toughio library, but the code runs all the time and fails. How can I solve this problem? Thanks in advance
-
I want to install TOUGH3
Hello, I am a student planning to analyze rock minerals. I would like to install TOUGH3 for the analysis. Please how do I get the software? Thanks. Efenwengbe Nicholas Aminaho
-
I can run TOUGH3 on RedHat Linux
Hi, I have the executables for windows and mac. However, the memory of my computer is not enough to perform the simulation I am working on, they granted me access to a Cluster with RedHat Linux.…
-
1D advection-diffusion problem ( velocity input)
I am using PetraSim 2018 so I can use only TOUGH (not TOUGH2) and TOUGHRECAT I try to solve 1D advection-diffusion problem where water velocity is require as an input value Please suggest me how…
-
Flow vs Time data from output
Hello everyone! I am a relatively new user of TOUGH3 software. I am using the software to model methane gas migration through soils. I wanted to get the FLOW data of NCG with respect to time.…
-
Question about Run-time Error
Hi everyone, I am trying to make simulation model for hydrate production with depressurization method using TOUGH+HYDRATE. However, I got an error message as shown in the attached picture.…
-
Heat Conductivity and Specific Heat
Regarding the magnitudes of these 2 parameters in the ROCKS section, I have not figured out what they exactly represent. For example, If I have a 30% sandstone,…
-
MeshMaker-Eleme Name Missing when Num of Het.Layer>200
Hi Dear All, I am trying to generate meshes by using meshmaker v.1.5. When the number of heterogeneous layers is more than 200, the name of elements disappears and 1 was written instead.…
-
Training
Hi all, Is there any training in UK or online for beginners as I need to get to use Tough2 and add Flac3d to it later
-
MOP(7)=9
Hi, I am putting MOP7=9, which gives me a full printout of Permeabilities in 3 directions, but I would like to have them beside the other parameters (lets say beside the porosity column).…
-
Which package is suitable for geochemical and geo-mechanical study of CO2 sequestration?
Which software package will be most suitable for studying the geochemical and geo-mechanical aspects of CO2 sequestration in saline aquifers and depleted hydrocarbon reservoirs?
-
Changes of hydraulic conductivity driven by effective stress
Hello, Does TOUGH have a simulator with geomechanics capabilities? I am specially interested in changes of hydraulic conductivity driven by effective stress.…
-
bounds with different temperatures
Hi, I'm new using TOUGH 3 I would like to know how to define a model in EOS1 with two bounds with different temperature each.
-
Model "Air" in TOUGH
Hi all.. Can someone please tell me whether it is possible to model “Air” in TOUGH? Like for instance, I have a (1m) height tank (closed at top) filled with waste (0.8m) which is emitting methane.…
-
AMD + AOCC/Flang
Hello all Does anyone have experience, and is willing to share, compiling any of the TOUGH codes on the latest AMD processors using the native compiler suite?
-
Hello everyone, regarding constant pressure, constant rate, and constant temperature, what should I do? THX
(1)My approach to constant pressure injection is to set the pressure of the injected grid in INCON, and set the volume of the grid to be infinitely large in MESH,…
-
TReactMech Simulator!
Hello, I am working on CCS research. I am wondering if the TReactMech simulator is available. I have seen it in papers, but can't find it the on LBNL marketplace. Please advise! Thanks. Nicholas
-
Best approach to modelling multiphase fluid flow of clay fines in a saturated silty sand media
Hi All, Is there a program within the TOUGH family that is suitable for modelling slurry injection within a saturated silty sand media. Kind regards, Rob
-
How to define the characteristic length (lc) for the extruded mesh?
Dear Community, Using TOIGHIO, this code extrudes a 2D mesh into a 3D mesh along the y-axis. mesh.points[:, [1, 2]] = mesh.points[:, [2, 1]] mesh.extrude_to_3d(height=100, axis=1,…
-
The pressure initialization presents a gradient distribution, but the temperature gradient disappears.
Hello everyone, I have a question. The pressure initialization presents a gradient distribution, but the temperature gradient disappears. The SAVE file shows that the temperature result is a constant…
-
Proppant transport
Dear all, what is the best way to simulate proppant transport in Tough2 or 3? Thanks, P.
Have a question about TOUGH? Ask it here. Or post a reply and share your knowledge.