-
Residual and solubility trapping
Hello everyone. I am working on Co2 storage using both ECO2N answer ECO2M. In the result we have 1-sg which represents the saturation of CO2 in gas phase.…
-
Compressibility On/Off in ECO2M
Hello folks, I posted a similar thread on TOUGH2, but here in TOUGH3, there seems to be an option under MOP2 where we can turn on/off the effect of compressibility on porosities.…
-
how to cancel or minimize VOC volatilization
Hi everyone! I am studying the transport of LANPL , but I do not want to consider the volatilization. How can I set up to cancel or minimize the volatilization of VOC
-
immature termination
Hi all, I'm trying to model an experiment where I had a cylinder filled with sand and some headspace on the top. The sand had some solvent in it. The whole cylinder was initially at about 100 degC…
-
Pore Compressibility in ECO2M
Hi guys, I have a 3D cartesian model where I assign constant porosity across all elements in the model. In TOUGH2, I think we can assign only a constant value of pore compressibility.…
-
T2Well questions
Hi there, Starting to play around with T2Well and having good fun. ;) Two things (at least) that I didn't understood: 1- ROCKS data block: the domain name for wellbore cells starting with 'x'.…
-
T2Well constant fluid properties and EOS1 relationship?
Hi, I am currently modelling a wellbore with constant density, thermal conductivity and specific heat capacity thermophysical properties at surface temperature 40 degrees like so: Wella 2 1665.e00 1.…
-
Parallel Output in TOUGH-3
Good Morning, I have recently started to experiment with using TOUGH-3 in parallel. When I output the simulation variables in CSV format, it seems to print certain parts of the simulation grid twice…
-
Output the spatial results for specific layer
Dears, I would like to know if there is a specific way to print out the results (spatial results at a specified time) for a specific layer of grid cells.…