-
MGTAB
Hi I am trying to run a domain containing numerous generation sources (>1000). I have faced an error about the number of generation sources. I searched for "MGTAB" in source codes and I found in…
-
Limitation to the number of VOCs ?
Hi everyone, I am currently running simulations with 8 VOCs (plus air and water) and I want to add 6 more VOCs. I modified the T2 file like so: - MNEQ = 17 (16 components + one energy balance…
-
Error loading simulation results with Petrasim 5
I was trying to load my simulation results, but I couldn't ...Do experienced users have any suggestions if with multiple simulation results I go through part of the loading results process and end…
-
Help with defining basic Confined and Unconfined Aquifer and transport models
Hello All, I am brand new to PetraSim and have been trying to learn to make basic models of confined and unconfined aquifers, model advection-dispersion,…
-
DIFFUSION Block
Hi, I am using TOUGH+Hydrate and I'm fairly new to it and learning as I go. I am using injection of water into a gas bearing reservoir. I wanted to include the diffusion block and tried the example…
-
Error in name first ELEM in mesh file
Hi, My model has 120.000 nodes and 320.000 connections was created with Mview. I remove the inactive elements.I get the error message below. There seems to be something wrong with the element naming.…
-
Pore compressibility issue in EOS9
Hello. I have a quick question about EOS9. Normally, the pore compressibility is used for considering specific storage due to pore volume change in TOUGH (at the MULTI subroutine).…
-
Generating initial conditions
Hi All, I am having problems generating initial conditions with the new version of T2ECO2N (v 2.1) that I have just purchased. Previously I would assign a large volume block at the top and base of…
-
VOL. GENER TYPE
Hi everyone, Wandering in the t2f.f file, I found that there is a GENER type not referenced in the TMVOC manual : "VOL." I assume it allows specifying an injection or pumping volumetric rate.…
-
INCON feature
Hello, I am trying to use INCON feature for a continuation from my previous TMVOC simulation. But, I cannot understand how to write it (parameters and the order). I want to use output from aa.…