-
TMVOC initial conditions Convergence Failure
Dears, I am trying to use TMVOC through Petrasim interface to build the attached conceptual model, but when I try to build such model I always have a convergence issues.…
-
How do I conduct a batch modeling of NaCl-water with primary minerals
Hello everyone, I am trying to conduct a batch modelling of NaCl-water with primary minerals in a rock sample over 10-year period to determine the brine composition and primary species in the rock.…
-
Print out of permeability reduction
Hi guys, Anybody out there could send me a piece of advise how to get permeability reduction "k-red" printed out when running Tough2 with ECO2N? I tried a couple of things in "OUTPU" and "SELEC",…
-
Initialization problem for ECO2N Problem No. 4 (rtp7)
Hello everyone, I'm new to TOUGH2.In running the fourth example of ECO2N, I don't understand how to set the initial conditions. 1. The manual mentions only involving boundary grid cells with…
-
Unable to execute code due to plugin not found?
Hello everyone, how can I solve this problem? I tried downloading the corresponding plugin but still couldn't solve the problem.
-
Restart problem with T2Well
Hi, I assume T2Well has the same set up for "restart" as Tough2 or Tough3. I have summarized the sequence of my primary and secondary runs below to ask for advise.…
-
GENER : COM1 vs MASS type ---->Pumping water from element in a 2phase flow problem
Hello everyone, I want to pump water from a certain elements using EOS7R. I'm confused between using: 1. "COM1" as a type and a negative value of the rate (< 0) to mean that I extract water from this…
-
T2Well-ECO2M case not running
Hello T2Well user community and superusers of Tough-ECO2xxx, Would be great if you are interested to look into this case and see the possible source(s) of error.…
-
TOUGHREACT1.2/ECO2N: About the inject rate and maximum pressure
Hi, everyone I'm using TOUGHREACT1.2/ECO2N with Petrasim. I am simulating the injection of CO2(isothermal) at a constant rate of 6.5kg/s(just one GENER)using a rectangle mesh,…



