-
Beginner
Hello everyone, I just got Petrasim+Tough2 licence from work but I have no idea where to start and how to start. I have noone around to ask and no experience with other simulators either.…
-
JT Heat exchange in the cell containing well (using ECO2N)
Hello guys, In a non-isothermal run with gas (CO2) injection into an aquifer conditioned within supercritical domain of CO2, you expect some heating from compression and some cooling from expansion.…
-
Cannot open file /parallel.info
Hi I am trying to use Parallel option for parallel execution but I am getting error that it cannot open /parallel.info in the itough2 output along mkdir: missing operand.…
-
Batch Model with Brine Injection and Secondary Minerals Precipitation
I am attempting to set up a batch reaction model. Initially, the formation water equilibrates with calcite, gypsum, albite, illite, and k-feldspar. Then,…
-
PyTOUGH: trying to visualize interblock fluxes for a MINC mesh with 'write_vtk'
Hello everyone, cc. @adrian_croucher I've been working with MINC meshes with the aid of PyTOUGH, which is quite handy, however, when I want to visualize (interblock) fluxes using the 'write_vtk'…
-
Facing problem to set boundary conditions
Hello TOUGH User Forum, I am Asma Recently, working on TOUGH3 simulation Here I have attached a TOUGH3 Input file (TOUGH3_Structure_Simulation.dat file) which is extracted from Leapfrog TOUGH after…
-
Training
Is there any training for tough2 or tough3 for beginners?
-
Large runlog.out file
Hi I am having problems with large runlog.out files causing my disk size to get full quickly. I have made sure that the parameters responsible for this in REACT block are not made greater than zero…
-
Technical question regarding mass conservation in TOUGH3
Dears, I am trying to model CO2 injection in brine saturated aquifer using a 1D radial model. CO2 is injected with a constant rate (10 kg/s). Rate distribution throughout the reservoir in my case is…
-
ECO2M:run is not convergent
Dear TOUGH community users, I am using T2WELL/ECO2M to simulate the injection of CO2 into the aquifer, building a model of 0~-900 m (3D) and the aquifer is located in-750m~-800m.…
-
Don't understand what causes this error
The first picture is the error from .exe, the second error is in the VERS, and only flow.out has been created flow.out:…
-
Increase time step size?
Hello, I am working on modeling the flow of CO2 and H2O in the hydrothermal system of a volcano using ECO2N V2. My eventual end goal is to have a cylindrical mesh (depth of 4.…
-
Output results of specific grid versus time
Hi everyone, I wonder if there is a code to extract the output results of a specific grid cell in OUTPUT_ELEM file versus time. Thanks in advance
-
Error1:Program received signal SIGSEGV: Segmentation fault - invalid memory reference
Hello, I have been working on a model for several months, and now when I run my model, I have the following error: Program received signal SIGSEGV: Segmentation fault - invalid memory reference.…
-
Compiling against more up to date PETSC version
Hi All, Just a question regarding compiling TOUGH3 against a PETSC versions higher than the 3.7 branch. Has anyone tried this? Is it possible? I know at some stage a number of the PETSC function…
-
How to deactivate the mutual solubility of CO2 - Brine mixture in TOUGH3/ECO2N
Dears, I am trying to model CO2 injection in saline aquifer reservoir. I would like to know if there is an option in TOUGH3/ECO2 to deactivate the mutual solubility between CO2 and brine.…
-
Control on outputs
Hi, Based on what is written in iTOUGH2 and other related manuals, printout frequency follows the calibration times when OUTPU module is applied. Is there anyway to get rid of this and only have the…
-
time range in GENER and PARAM
Hi All, The time steps shrinks to E-07 near the end of simulation period. I found this message in the OUTPUT file. QQQQQQQQQQ SUBROUTINE QU QQQQQQQQQQQ --- [KCYC,ITER] = [1452, 1] 0.…
-
Problem 5 –1-D Radial Model for CO2 Sequestration in a Deep Saline Formation (ECO2N
Hello everyone, I have been working with the example "Problem 5 –1-D Radial Model for CO2 Sequestration in a Deep Saline Formation (ECO2N)". This problem has a constant injection of CO2 for 10 years.…
-
Radioactive chain decay
Hi Is it possible to simulate radioactive chain decay (i.e parents produce daughter elements) in TOUGHREACT? It is more complicated than the simple decay equation,…
-
In petrasim, how to enter the atmospheric pressure by file?
In the petrasim, how can i enter the pressure by Sine?In other word ,I want to set the pressure via sine function. Thanks a lot! Sincerely!
-
how to get the variations of mineral volume fraction from the PetraSim?
Hi,everybody I am trying to finish one the examples of the petrasim manual about TOUGHREACT. I have successfully executed the program, but couldn't find any variations of mineral volume…
-
Commingled injection well modeling
Hi, I am trying to model a commingled injection well which is a well completed through multilayers (5 layers in my model). Every layer in my model is represented by a single grid block in the Z…
-
What if the model does't have boundary setting?
Hallow everyone! I'm a beginner of TOUGH. All the time, i always use the dirichlet boundary by giving a 1E50 volume. Today, an idea come to me : What if the model does't have any boundary settings?…
-
GENER BLOCK : water pumping EOS7r two phase problem
Hello everyone, I want to pump water from a certain elements using EOS7R. I'm confused between using: 1. "COM1" as a type and a negative value of the rate (< 0) to mean that I extract water from this…