-
Initial/boundary conditions for discharge from spring (ECO2N)
Hello, I am trying to use ECO2N to model a system where salty, CO2-rich water is upwelling into a shallow freshwater aquifer that is horizontal for some distance,…
-
MOP(7)=9
Hi, I am putting MOP7=9, which gives me a full printout of Permeabilities in 3 directions, but I would like to have them beside the other parameters (lets say beside the porosity column).…
-
compiling Gslib in cluster
Dear Stefan, I am trying to compile EOS7C-Gslib. It works well on my PC where I used Visual studio. But I can't manage to do the same thing on cluster. I got this linking error: it2main.…
-
MINFLAG units
I'm doing TOUGHREACT simulations. For the kdd_min.tec file, MINFLAG I used 'Change of mineral abundance in mol/m3 medium'. I don't know what this 'medium' mean.…
-
anisotropic permeability for TOUGH3-EOS7
Dear all, I am trying to modify my INFILE (isotropic permeability) to specify anisotropic permeability element-by-element. My original INFILE (isotropic permeability cases,…
-
GSLIB+Anisotropy permeability
Hi, I am trying to create a permeability realization field using GSLIB in iTOUGH2. I set permeability in 3 directions in ROCKS, with an anisotropy ratio of 3 in GSLIB block.…
-
Using EXT for visualization of 1000 TOUGH2 output files
Hi Everyone, I am using EXT.exe to extract data from TOUGH2 output file to the TECPLOT input file format. The point is each time that I am running EXT.exe,…
-
Increasing the number of rock materials
Hi everyone, I am working with TOUGH2/EOS7C. I need to use 44 different rock materials in the ROCKS. I am wondering if there is any way that I can increase the number of rock materials from 27 to 44…
-
TOUGH-HYDRATE - Problems with the maximum mass fraction of methane in aqueous phase
I'm trying to equilibrate a sloping system, containing a AqH phase and a Aqu phase. If methane mass fractions of methane in water are not maximum, hydrate phase dissolves.…
-
Assigning atmospheric boundary conditions
Hi all., I am a relatively new user in TOUGH3. I am using TOUGH3-EOS7CA module for quantifying methane gas emissions into the atmosphere. I am very unclear about modeling an atmospheric element in…
- Answered
-
How to simulate a tide boundary?
Hello, everyone, I am a new TOUGH2 user. I want to creat a model using EOS3 module. The left boundary of the model is a water-land interface. The mean sea level is assumed to be 6m below the ground…
-
System of equations for EOS4
Hello, I am trying to write the system of equations for EOS4. But one equation is missing. I think it is the relation between mass fraction of water in gas phase (or mass fraction of air in gas…
-
Unable to download BLAS when installing TOUGH3 on a Linux platform
An error of failing download BLAS consistently happened when I was trying to install TOUGH2 on a Linux platform. The err.log said ' downloading 'http://www.netlib.org/blas/blas2.1.tgz' failed'.…
-
constant injection pressure
Hi all, I would like to simulate 1D soil grouting with chemical injection material. I'm using iTOUGH2 with EOS-GEL module. I have a constant injection pressure and wants to determine development of…
-
Defining ِboundary conditions
Hello everyone. I have trouble in defining a special boundary condition with a fix pressure, but it is also a no flux boundary for contaminant transport.…
-
Mesh Maker 1.5 3d/2d MESH VISULAIZATION
Can any body cooment on whether, its possible to visualize the mesh you have created using Mesh Maker 1.5 can be visualized using any software? plz tell guys,…
-
Quick fix of a bug in ECO2N V2.0
In the ECO2N V2.0 User’s Guide, it says that setting IE(16)=1 invokes the CO2/brine mutual solubility formulation from ECO2N V1.0 for low temperature (<99C).…
-
DIFFUSION Block
Hi, I am using TOUGH+Hydrate and I'm fairly new to it and learning as I go. I am using injection of water into a gas bearing reservoir. I wanted to include the diffusion block and tried the example…
-
modelling a river
Hi, What is the best way to define a b.c. for a river (standing water body)? I have leak point at some depth below the bottom of a river within a groundwater.…
-
Pre/post processing tools for TOUGH+ Hydrate
Hi, I am starting to use this tool and wondered if PyTOUGH could be used for this? I am familiar to Python and would be nice to know if there exists scripts fro pre and postprocessing in Python.…
-
Tough+ Hydrate: Zero support: No Matt Reagan or George Moridis
I am just bewildered by the lack of initiative or support or help for TOUGH+ HYDRATE There is absolutely not a single moderator or software developer available to answer the queries? On top of that,…
-
ECO2N, Model initial temperature distribution
Dear all members, Hi, I'm working on thermal injection simulation in TOUGH2 and I want to define an initial temperature distribution for my model. After program execution (ECO2N),…
-
Effective or Total Porosity in TOUGH2 EOS1
Migrated from Rockware Support Forum: Does TOUGH2 EOS1 assume total porosity or effective porosity for water? Is there a built-in conversion from one to the other?
-
Convergence problem chemistry
Hello, everyone, I was running a water-rock interaction model with Toughreact. The runlog.out file prompted "Warning: chemistry did not converge at node A1114 (routine NEWTONEQ),…
-
Piecewise homogeneous model
Hi, I tried to make a piecewise homogeneous transport (v is varying with different regions) model by setting a couple of 'fixed state' cells with a constant pressure to get the desired pressure…
