-
Error Message
Hi everyone, I have the following error message while running T2Well. Can anyone clarify what is the problem? At line 677 of file t2f.f (unit = 5, file = 'stdin') Fortran runtime error:…
-
ECO2M: Extracting Vector Orientation
Hello, I'm using TOUGH2-ECO2M and interested in extracting the "direction/orientation" of the vector output data (flow of heat, flow of fluid, etc), ideally generated in the same CSV format as in…
-
The pore pressure decreased near the non-reservoir wellbore during the CO2 injection process
Dear TOUGH community users, When I used T2WELL/ECO2N to simulate carbon dioxide non-isothermal injection, I found that when using cryogenic supercritical CO2 injection,…
-
ECO2M: Meaning of VLIQ at Saq=100%
Hello, I am using TOUGH2-ECO2M, and I have a question about the scalar output parameters “Vliq” and “Vgas”. I’m using PetraSim as the post-processor, and the PetraSim windows shows “Pa-s” as the…
-
Converting single porosity mesh into dual porosity (dual-perm) mesh
By any chance, does anyone know a way of converting single porosity mesh elements file into dual porosity (dual-perm) mesh model file (with correct connections)? Would appreciate any feedback.…
-
Error For missing parameters,
My grid block size is 1 x 1 cm. The error said that I have a problem with specific element eventhough it is defined. I am not sure what is the issue. Could you please help me.
-
low injection rate can induce the EOS CANNOT FIND PARAMETERS?
Hi,everyone I want to simulate the dissolution and precipitation induced by meteoric water injection (toughreact332_EOS1). I set injection rate 9.5129E-02 kg/s during 2Ma,…
-
How to implement the Mandel's effect with tough-flat coupling
Hello everyone, I'm a student during master's degree and have spent more than a year on tough-flac coupling, but still have some big problems on this field.…
-
TOUGH2/EOS5. Temperature behaviour.
Dear all, Is there any reason why the pressure decreasing with increasing the pressure from 50 Celsius to 100 Celsius ? I thought about the diffusion coefficient but it is stable in the system.…
-
Doubts about the integrated finite difference method (IFDM)
Hello everyone, I am conducting a comparative study between the TOUGH and DARTS simulators. I went through the basic documentation to understand how both simulators work,…
-
Alternative for running immiscible brine-CO2 system
Hello folks, Sometimes you may need a reference or a benchmark to see the effect caused by implementation of an EOS as a whole. For a Brine-CO2 system, even unphysical,…
-
ECO2M running stopped, unit temperature and pressure status abnormal
Dear TOUGH community users, The model is established using Ansys apdl starting from 0 m, with the first unit below the surfacecenter serving as the wellhead unit.…
-
run time error M6201:math
Hello everyone, I don't know where this error occurs and how to solve it, hopefully you can help me,thanks!
-
Error while running a T2LBM model
Does anyone know what is this error? forrtl: severe (157): Program Exception - access violation
-
Initialization problem for ECO2N Problem No. 4 (rtp7)
Hello everyone, I'm new to TOUGH2.In running the fourth example of ECO2N, I don't understand how to set the initial conditions. 1. The manual mentions only involving boundary grid cells with…
-
Aspadol 100mg – HealthNaturo
Aspadol 100mg is a brand of Tapentadol. It is a pain medicine that treats acute as well as chronic body pain. People who are suffering from arthritis, neuropathic pain, post-surgery pain,…
-
Declining steam cap pressure
Dear TOUGH community, I am modeling a liquid-dominated geothermal reservoir underlying a steam cap. In the natural state I was able to match the cap pressure providing mass by means of several…
-
Printout problem with TIMES
I want to use DELAF function in TIMES, but no matter how I assign the value, the printout in FOFT won't change. Is there any format error in my input file?
-
How could charge diffierent boundary water at same model?
I set two types of boundary water in same model. And I want to charge first boundary water into reservoirs during 100-50 Ma, then charge the second one by same boundary elements sicne 50 Ma to…
-
Modafinil for excessive daytime sleepiness
Modafinil is a Nootropic that promotes wakefulness and helps treat excessive daytime sleepiness. It is an effective option that works within 30 minutes of intake and stays active for about 15 hours.…
-
Unable to execute code due to plugin not found?
Hello everyone, how can I solve this problem? I tried downloading the corresponding plugin but still couldn't solve the problem.
-
what is Tapaday 200mg?
Tapaday 200mg Tablet is an opioid medication for the treatment of acute pain in adults ranging from mild to severe. You can take it to alleviate a wide range of symptoms, including headaches, fever,…
-
How to easily uplift with better memory power | Mymodalert
Memory fluctuates with age is a natural thing to happen with everyone. Age people grow older, changes occur in all parts of the body, including brain also.…