-
initial condition in EOS3 for volume elements with zero gas saturation
in a model I am working with, at initial condition all volume elements are fully saturated with water, and there is only one element which is fully saturated with air.…
-
Whether can TOUGH2 be used to simulate DNAPL spill (non volatile) in the vadose zone (non volatile oil, water and air phases)?
Hello everyone, I am trying to find a simulator that can simulate DNAPL spill in the vadose zone. The DNAPL is not volatile, but it can be dissolve into water.…
-
Defining a set of grid block boundaries in radial direction in TOUGH2-ECO2M
Dear all, I am trying to define several radial distances in my model domain to see the brine influx and gas saturation at several radial boundaries around the injection well.…
-
Who use MOP(14) is one?
When I prepare INFILE, I can choose mop(x). For MOP(14), If I choose mop(14) is one, the length of element, connection incon, gener are 8 characters. If i choose mop(14) is zero,…
-
"EOS CANNOT FIND PARAMETERS AT ELEMENT" error message
Hi, dear all I'm working on geothermal model by using TOUGH2 with PetraSim. Now I had generated input file from PetraSim (0114.dat) and recompile the eos1.exe file.…
-
error message during compiling eos4
Dear Stefan iam trying to compile eos4 following the same steps mentioned in the manual and read me file using comaq compiler fortran 6.5 the file are ma28.f t2cg2.f meshm.f t2f.f eos4.f t2solv.…
-
Role of ico2h2o and mass balance
I have run a number of simulations using Toughreact Versions 1.2 and 3OMP and the ECO2N EOS. In trying to understand the mass balance I have tried runs with 0 entered for ico2h20 and 1 or 2 as well.…
-
Timestep problems while including O2(g) in calculations (V3-OMP / ECO2N)
Hello everybody, I have found the next problem for you to resolve :-). I am using Toughreact V3.0-OMP, but the problem would appear with V2, too, I assume.…
-
compile using gfortran
I'm sorry to ask questions so many times, but I can count on only this forum. I read https://tough.forumbee.com/t/80xxf4/install-of-tough2 , and I'm facing the same (Ana Avila 's compiler) problem.…
-
TOUGH2 Sample Problem
Hello, This is Mo. I just started learning TOUGH2 and iTOUGH2. I am working on Problem No.4 (Five-Spot Geothermal Production /Injection). I am trying to modify the problem to my own problem.…