-
Pre- & Post- processors - What are their Pros and Cons?
Greetings I need to develop reactive-transport models with TOUGHREACT and run simulations as part of a project on "subsurface barrier formation as a CO2 leakage mitigation and remediation…
-
How to set a production well with constant pressure
Hi everyone, How to set a horizontal production well with a fixed pressure in tough + hydrate? When setting source / sink in Gener, SS_ Type can only set a constant flow rate.…
-
pT+H compiling
Hi Dear All We are trying to compile a parallel version of Tough+Hydrate (pT+H). So far we have been able to generate executable files of the Parallel version of TOUGH+HYDRATE (pT+H) at the…
-
Assigning source/sink in GENER block without element name/ using meshmaker
Hello dear, A using cartesian grid of 200 x 340 for x and y dimension. Am not sure how to assign the element block data and the connections. I have the Meshmaker software which i fill in all the…
-
Tuning diffusion coefficients for water isotopes
Hi @Eric Sonnenthal I have a few questions about modeling diffusion for water isotopologues in an evaporating soil. Basically, the setup (following Singleton et al.…
-
Problem with running the sample (r2dl) using TOUGH3/TMVOC
Hi, everyone, I had been using TOUGH2 family code. Recently, I began to use TOUGH3, particularly using TMVOC module for my research. I firstly tested the Problem No.…
-
TOUGH3; Running time is too long
Dears, I am trying to run a simulation using 2D model for CO2 injection in stratified reservoir. I have 650 grid cells in the radial direction and 79 grid cells in the z-direction as illustrated…
-
use ENDFI to create mesh before initializing simulation , but how??? tried several combinations.....Mesh file remains empty
😥 hello everyone, I am using TOUGH+Hydrate v 1.5 I bought it from LBNL(executable only) I think, that for mesh creation, ENDFI must be put in place of ENDCY now running this, creates mesh file,…
-
TOUGH2 Sample Problem
Hello, This is Mo. I just started learning TOUGH2 and iTOUGH2. I am working on Problem No.4 (Five-Spot Geothermal Production /Injection). I am trying to modify the problem to my own problem.…
-
MINC and MIM
Hi All, I'm comparing MINC to mobile-immobile (MIM) models, most of which focus on transport (i.e., with the diffusion as the process connecting the two domains).…