-
Input of pollutant data
Hello everyone, now I have the pollutant distribution data of a site, and I want to import this pollutant data as the initial condition of the model after running the flow field model.…
-
Understanding SOLVR - From problem 5, 1-D Radial Injection of CO2 flow.inp file
Hello, I have been looking for what the 3rd, 4th, and 5th lines of SOLVR in the 1D Radial CO2 injection problem are but I cannot locate them in the manual.…
-
Error Message
Hi everyone, I have the following error message while running T2Well. Can anyone clarify what is the problem? At line 677 of file t2f.f (unit = 5, file = 'stdin') Fortran runtime error:…
-
Permeability-Porosity relation
I use the TOUGHREACT EOS1 to model chemical reactions in porous media. In the Permeability-Porosity relation, I choose the Verma-Pruess correlation. The equation is k/ki=(phi-phi_c/phi_i-phi_c)^n.…
-
Local Grid Refinement in T2Well
Hi everyone, I am using T2Well to model CO2 injection in reservoir system which has two wells; injection well and monitoring well. As far as I understand, in T2Well,…
-
How to import field reservoir properties data into reservoir model in TOUGH2?
Hi everyone, I have field data showing spatial temperature and salinity variation of a given reservoir. I would like to know if these data can be imported in a reservoir model in TOUGH2.…
-
Tough+Hydrate Model Initialization to Steady state : Pressure gradient appears but Temperature gradient disappears
Hello Everyone. I am trying to run the model to steady state. I have a 190 x 1000 model. I fixed the top boundary to 6.5C and 104bar by making the cells inactive I set simulation end time to (10,…
-
Visualizing Results from T2Well using Paraview
Hi everyone, I am trying to visualize the results obtained from T2Well (OUTPUT file) using Paraview. I tried to use the following steps: 1. Install toughio in Anaconda prompt, 2.…
-
iTOUGH2 work with EOS7C
Hello, I am new to iTOUGH2 and wanted to estimate parameters in a model with EOS7C module. I learned from the iTOUGH2 users guide that the maximum number of primary variables (MAXPV) is 4.…
-
Set multiple processors in Windows cmd for TOUGH3 running
Hello TOUGH community. I am using TOUGH3 after compiling the codes with Microsoft Visual Studio in Windows. I can run the code with a single processor, but how can I set the multiple processors?…
-
Associating the variables to the numbers in a flow.inp file
Hello everyone, I am trying to understand what is what in the ELEME and CONNE sections of the flow.inp file for "1-D radial flow problem for CO2 injection into a saline aquifer" (problem 5 ECO2N).…
-
pT+H compiling
Hi Dear All We are trying to compile a parallel version of Tough+Hydrate (pT+H). So far we have been able to generate executable files of the Parallel version of TOUGH+HYDRATE (pT+H) at the…
-
Maximum Extraction Rate for nodes on DELV?
Hello all, I wasn't able to find out in the T3 manual if there is a way to cap the output from a GENER element set on DELV such that the initial rates are not so huge.…
-
Difference between Tough+hydrate v1.2 and v1.5 version
Is there a reason why Tough+hydrate v1.2 can open some files and Tough+hydrate v1.5 can not?
-
without the addition of inhibitors
Simulating the process of hydrate formation, without the addition of inhibitors, why is there no hydrate formation in some cells
-
pressure remains constant during the formation of hydrate
I am using T+H to simulate the formation of hydrate. May I ask how to ensure that the pressure remains constant during the formation of hydrate by using the constant pressure method
-
"ITERATION ON SOLUBILITY FAILED" in restart
Hi All, I am running TOUGH3 EOS7C for gas production and want to restart the simulation after some time. I rename the SAVE file as INCON (keep the +++ lines as I want to continue with time scale)…
-
Error in Problem 6 2-‐D Radial Model for CO2 Sequestration in Deep Saline Formation from TOUGHREACT V4
Hi everyone, I have been trying to run TOUGHREACT V4 Deep Salt Formation 2-D Radial Model Problem 6 with the instructions in the manual. however, I have only obtained results for the first 10 years…
-
Errors when compiling TOUGH2 ECO2N
Hello Every one, When I compiled the TOUGH2 ECO2N in Microsoft Visual Studio, I met the problem as follow, could you please tell me how to solve it? I have added T2CG2.f, MA28.f, MESHM.f, T2f.…
-
Error when use MESHMAKER to generate XYZ mesh in TOUGHREACT ECO2N sample problem
Hello dear, I am trying to learn the ECO2N module in TOUGHREACT, so I began at the sample Problem 5 – 1-D Radial Model for CO2 Sequestration in a Deep Saline Formation.…
-
TOUGHREACT error while loading shared libraries: libifport.so.5:, but used gfortran complied
I was trying to run some test files using treactv413omp_eco2n_linux, but I ran into the error: error while loading shared libraries: libifport.so.5: cannot open shared object file:…
-
runtime in Problem 6 2-‐D Radial Model for CO2 Sequestration in Deep Saline Formation from TOUGHREACT V4
Hello everyone! I am working on Problem 6 2-‐D Radial Model for CO2 Sequestration in Deep Saline Formation from TOUGHREACT V4.0. I already got the results for the first 10 years...…
-
need help in using Ext.exe
Hi all, I'm having some trouble extracting the data from the OUT file generated by TOUGH2 using Ext.exe. My grid number is 19220 and connection number is 55459,…
-
Adsorbed amounts included in concentrations?
Could you please confirm whether the total concentrations that are output from a TR simulation include the adsorbed amount when using Kd linear adsorption?
-
AZTEC solver - rapidly increasing temperatures going out of range
I am running an inj/prod well doublet in a geothermal reservoir with free gas at the top of the reservoir so using EOS7C (with 4-12 cores depending). The AZTEC solver crashes rapidly b/c the…