-
ECO2M: Extracting Vector Orientation
Hello, I'm using TOUGH2-ECO2M and interested in extracting the "direction/orientation" of the vector output data (flow of heat, flow of fluid, etc), ideally generated in the same CSV format as in…
-
Printout problem with TIMES
I want to use DELAF function in TIMES, but no matter how I assign the value, the printout in FOFT won't change. Is there any format error in my input file?
-
How could charge diffierent boundary water at same model?
I set two types of boundary water in same model. And I want to charge first boundary water into reservoirs during 100-50 Ma, then charge the second one by same boundary elements sicne 50 Ma to…
-
Maximum Extraction Rate for nodes on DELV?
Hello all, I wasn't able to find out in the T3 manual if there is a way to cap the output from a GENER element set on DELV such that the initial rates are not so huge.…
-
TMVOC initial conditions Convergence Failure
Dears, I am trying to use TMVOC through Petrasim interface to build the attached conceptual model, but when I try to build such model I always have a convergence issues.…
-
Hello everyone, regarding constant pressure, constant rate, and constant temperature, what should I do? THX
(1)My approach to constant pressure injection is to set the pressure of the injected grid in INCON, and set the volume of the grid to be infinitely large in MESH,…
-
TReactMech Simulator!
Hello, I am working on CCS research. I am wondering if the TReactMech simulator is available. I have seen it in papers, but can't find it the on LBNL marketplace. Please advise! Thanks. Nicholas
-
Suppress CO2 dissolution in TOUGH+RealGasBrine
I am trying to suppress CO2 dissolution in TOUGH+RGB (set CO2 solubility in brine as 0) to match with another model that doesn't take CO2 dissolution into consideration.…
-
PETSC configure command failed-when compile TOUGH3
I got the "PETSC configure command failed" error at compiling TOUGH3. I need some help. Thanks. cd /Users/wuhao/TOUGH3/TOUGH3v1.0/TOUGH3-Code/esd-tough3/build/tpl-build/tpls/petsc/petsc-3.7.…
-
TOUGH3 vs TOUGH2-MP Printout of Mass fractions in single phase
Our understanding is that adding all component mass fractions of a phase add up to one. In TOUGH3 (or at least using eos3), it would appear that this is not the case.…
-
Best approach to modelling multiphase fluid flow of clay fines in a saturated silty sand media
Hi All, Is there a program within the TOUGH family that is suitable for modelling slurry injection within a saturated silty sand media. Kind regards, Rob
-
modify output flowdata.tect
Dear all, I 'm using EOS1 with TOUGHREACT V4.13omp and I would like to modify the source code to output in the flowdata.tec file the density of the different phases with their specific internal…
-
How to define the characteristic length (lc) for the extruded mesh?
Dear Community, Using TOIGHIO, this code extrudes a 2D mesh into a 3D mesh along the y-axis. mesh.points[:, [1, 2]] = mesh.points[:, [2, 1]] mesh.extrude_to_3d(height=100, axis=1,…
-
The pressure initialization presents a gradient distribution, but the temperature gradient disappears.
Hello everyone, I have a question. The pressure initialization presents a gradient distribution, but the temperature gradient disappears. The SAVE file shows that the temperature result is a constant…
-
Error when trying to output the time series
So, I have 40000+ elments, and I want to output all of them's data, so I put all the elements in the solute.inp, for example But then I have the error Elements for which to output time series:…
-
Gas production units in TOUGH+ is it m3/d or Sm3/d in Hydrate_Status : T+H v 1.5
I am trying to figure out whether T+H v 1.5 reports Sm3/d in Hydrate status file or simply m3/d. If it is m3/d then how do i get the necessary Thermodynamic variables to change it to Sm3/d.…
-
Restart problem with T2Well
Hi, I assume T2Well has the same set up for "restart" as Tough2 or Tough3. I have summarized the sequence of my primary and secondary runs below to ask for advise.…
-
Modafinil for excessive daytime sleepiness
Modafinil is a Nootropic that promotes wakefulness and helps treat excessive daytime sleepiness. It is an effective option that works within 30 minutes of intake and stays active for about 15 hours.…
-
Temperature dependence cation exchange
Hello, I included cation exchange in my simulation, in which I simulate injection of hot (90 degrees C) water into a relatively cold aquifer with the exact same composition.…
-
cannot find -laztec
Hi folks, I am doing a clean TOUGH3 installation on a Linux system and want to use the PETSc solver. I have no interest in using the AZTEC solvers. But it seems I cannot finish building TOUGH3…
-
Unable to execute code due to plugin not found?
Hello everyone, how can I solve this problem? I tried downloading the corresponding plugin but still couldn't solve the problem.
-
Proppant transport
Dear all, what is the best way to simulate proppant transport in Tough2 or 3? Thanks, P.
-
Error in installation
Can somebody help in rectifying the error encountered as shown in attached figure. Thank you in advance