-
In petrasim, how to enter the atmospheric pressure by file?
In the petrasim, how can i enter the pressure by Sine？In other word ,I want to set the pressure via sine function. Thanks a lot! Sincerely！
-
Access violation
Hi I encountered following error. Has anyone experienced this and if so how did it get resolved?
-
Issue modeling a soil with zone of unsaturated vapor
Hi, I am using EOS3 to model a evaporating soil and have encountered some behavior with soil air relative humidity that I think is unrealistic. My 1D setup has a static block at the bottom to act as…
-
Time-Dependent Material Properties
Hello, Is there a way to implement time-dependent material properties (block ROCKS) in TOUGH3? I am interested in assigning time varying permeabilities (prescribed as a function of time).…
-
T2Well semi-analytical solution in reservoir
Hi all, I notice in the T2Well manual that you can turn on a semi-analytical solution of the reservoir by setting thermal conductivity in well cells to a negative value.…
-
eco2m Fortran runtime error
I have been getting the following error when beginning a TOUGH3 run using the eco2m eos: TOUGH STATUS: Total preprocessing time = 17.409522771835327 At line 3180 of file…
-
Pressure drop using GENER
Dear Tough community, I'm trying to run a 1D simulation with initial and boundary waters. I'm using GENER to drive the flow. The program runs, but I get a drop in pressure for each step in flowdata.…
-
T2well output files
Hello T2well users; I have just started using the code. I run a case with only a well model (reservoir represented solely by the last grid block at the bottom).…
-
Incorporating dip angle in meshmaker
Hello, I am trying to model a gently dipping aquifer, and am setting up the grid using the online meshmaker utility. The input field called "Angle between Y-axis and the horizontal" is meant to help…
-
JT Heat exchange in the cell containing well (using ECO2N)
Hello guys, In a non-isothermal run with gas (CO2) injection into an aquifer conditioned within supercritical domain of CO2, you expect some heating from compression and some cooling from expansion.…
-
TOUGHREACT compilation using gfortran MinGW-error message
Dear Community, I would like to compile TOUGHREACT (version: TR-OMP_Source_v3.3.2-OMP) using gfortran with MinGW. I typed make eos1 -f makefile_gf, and had the attached error message.…
-
T2Well-ECO2N wellbore-annulus modelling
Hello T2well-ECO2n users and advisors I am a new user of T2well, but familiar with Tough2 and several EOSs. Due to a limited number or limited variation in modelling samples following the code,…
-
COM2 injection with eco2m eos
I have not been able to find any documentation on how brine injection is handled when using eco2m. NaCl is COM2 in the GENER block. I would assume that salt mass fraction of the brine would be part…
-
Calculating Total Heat Generated in an Area
Dear all, I am working with TOUGH2 Landfill Bioreactor Model (T2LBM) to simulate a biological reaction in my domain which stimulates by injecting oxygen.…
-
CO2 solubility ECO2n carbonated water
Hi everyone, I'm working on CO2 mineralization in the subsurface where carbonated water is injected into reactive minerals, similar to the CarbFix project.…
-
TMVOC initial conditions Convergence Failure
Dears, I am trying to use TMVOC through Petrasim interface to build the attached conceptual model, but when I try to build such model I always have a convergence issues. P.…
-
Can TOUGH3 model temperature below zero degree?
Hi All, I am new to TOUGH and plan to use it in modeling a borehole thermal energy storage system. However, the ground temperature surrounding the system may drop to below zero degree.…
-
Compiling and Running TOUGHREACT v3.32 using Ubuntu/Linux
Hey everyone, I've been able to get the newest version of TOUGHREACT working with my workstation, which has Linux/Ubuntu (v 17.04) as its OS. Setting things up didn't go without hitches, though,…
-
FOFT keyword no printing
hi. I have been trying to select the elements of my interest to print out in the forward.out or another time series file like in the manual examples by using FOFT in my forward input file but…
-
The extent of CO2 injection cooling using ECO2N
Hi all, Aiming at thermal QC of another code by using Tgh2-ECO2N, I made a simple coarse model with dimension 25x5x100 where dx=dy=200m and dz=4m, por & perm were 0.…
-
creating T2Well .exe from source code
Hi, I have access to a T2Well and TOUGH3 license and would like to have a go at generating the executable from the T2Well source code. I can see in the T2Well/ECO2N manual that there is an NMAKE…
-
TOUGH+HYDRATE pre/post scripts
If there is any active user on T+H, is anyone interested in discussing pre and post processing options. After struggling for some time, I have managed to put some scripts in python to process both…
-
Trapping CO2 in ECO2N
Dear All, I am working on CO2 storage using ECO2N. In the output file, we have "P T SG SS XNACL YH2OG XCO2aq PCAP k-red" How can I calculate the residual trapping CO2 saturation and solubility…
-
Residual and solubility trapping
Hello everyone. I am working on Co2 storage using both ECO2N answer ECO2M. In the result we have 1-sg which represents the saturation of CO2 in gas phase.…
-
Compressibility On/Off in ECO2M
Hello folks, I posted a similar thread on TOUGH2, but here in TOUGH3, there seems to be an option under MOP2 where we can turn on/off the effect of compressibility on porosities.…