-
Heat Conductivity and Specific Heat
Regarding the magnitudes of these 2 parameters in the ROCKS section, I have not figured out what they exactly represent. For example, If I have a 30% sandstone,…
-
Beginner
Hello everyone, I just got Petrasim+Tough2 licence from work but I have no idea where to start and how to start. I have noone around to ask and no experience with other simulators either.…
-
Fortran runtime error!!
Hi, I am running a model with EOS7C on UNIX. The code seems working with no convergence error. But, I always get: Fortran runtime error: Expected REAL for item 14 in formatted transfer,…
-
Actually, I need a software I could model the Coupling Thermo-Hydro-Mechanical damage.
I was wondering if this software(TOUGH2) is suit for this purpose or not. please let me know if you have any more information in this area.Thanks
-
Using TMVOC or just TOUGH basic (EOS9) ?
Hi, can i know the step for LNAPL spill on top of surface then migrate to the bottom of soil, I just wanna check the saturation of soil and the velocity of LNAPL in unsaturated soil condition.…
-
mesh creation
I have a question regarding mesh creation. I am working with Petrasim, T2VOC. I appreciate if you could help me. Is there any limitation for creating mesh?…
-
mesh creation
I have a question regarding mesh creation. I appreciate if you could help me. Is there any limitation for creating mesh? I know in finite difference software like MODFLOW , for example,…
-
What if the model does't have boundary setting?
Hallow everyone! I'm a beginner of TOUGH. All the time, i always use the dirichlet boundary by giving a 1E50 volume. Today, an idea come to me : What if the model does't have any boundary settings?…
-
Defining a multi-layered aquifer in TOUGH2
Dear All, I am trying to simulate a sandstone aquifer capped by two sealing layers (Shale and evaporite), so there are totally 3 layers in my model. I think there are two blocks in the input file…
-
How to define heterogeneity in TOUGH2-ECO2N
Hi I am a new TOUGH user. I am interested in learning about defining fluid injection models with TOUGH2. I would like to learn about building heterogeneous models - which Kx and Ky differ from one…
-
Modeling of flow of bitumen in porous media
Dear all, I want to model the shaft seal of repository in clay. The shaft seal consists of bentonite plugs and gravel column filled with bitumen. The goal of modeling is to investigate the behavior…
-
Initial/boundary conditions for discharge from spring (ECO2N)
Hello, I am trying to use ECO2N to model a system where salty, CO2-rich water is upwelling into a shallow freshwater aquifer that is horizontal for some distance,…
-
MOP(7)=9
Hi, I am putting MOP7=9, which gives me a full printout of Permeabilities in 3 directions, but I would like to have them beside the other parameters (lets say beside the porosity column).…
-
compiling Gslib in cluster
Dear Stefan, I am trying to compile EOS7C-Gslib. It works well on my PC where I used Visual studio. But I can't manage to do the same thing on cluster. I got this linking error: it2main.…
-
MINFLAG units
I'm doing TOUGHREACT simulations. For the kdd_min.tec file, MINFLAG I used 'Change of mineral abundance in mol/m3 medium'. I don't know what this 'medium' mean.…
-
anisotropic permeability for TOUGH3-EOS7
Dear all, I am trying to modify my INFILE (isotropic permeability) to specify anisotropic permeability element-by-element. My original INFILE (isotropic permeability cases,…
-
GSLIB+Anisotropy permeability
Hi, I am trying to create a permeability realization field using GSLIB in iTOUGH2. I set permeability in 3 directions in ROCKS, with an anisotropy ratio of 3 in GSLIB block.…
-
Using EXT for visualization of 1000 TOUGH2 output files
Hi Everyone, I am using EXT.exe to extract data from TOUGH2 output file to the TECPLOT input file format. The point is each time that I am running EXT.exe,…
-
Increasing the number of rock materials
Hi everyone, I am working with TOUGH2/EOS7C. I need to use 44 different rock materials in the ROCKS. I am wondering if there is any way that I can increase the number of rock materials from 27 to 44…
-
TOUGH-HYDRATE - Problems with the maximum mass fraction of methane in aqueous phase
I'm trying to equilibrate a sloping system, containing a AqH phase and a Aqu phase. If methane mass fractions of methane in water are not maximum, hydrate phase dissolves.…
-
Assigning atmospheric boundary conditions
Hi all., I am a relatively new user in TOUGH3. I am using TOUGH3-EOS7CA module for quantifying methane gas emissions into the atmosphere. I am very unclear about modeling an atmospheric element in…
- Answered
-
How to simulate a tide boundary?
Hello, everyone, I am a new TOUGH2 user. I want to creat a model using EOS3 module. The left boundary of the model is a water-land interface. The mean sea level is assumed to be 6m below the ground…
-
System of equations for EOS4
Hello, I am trying to write the system of equations for EOS4. But one equation is missing. I think it is the relation between mass fraction of water in gas phase (or mass fraction of air in gas…
-
Unable to download BLAS when installing TOUGH3 on a Linux platform
An error of failing download BLAS consistently happened when I was trying to install TOUGH2 on a Linux platform. The err.log said ' downloading 'http://www.netlib.org/blas/blas2.1.tgz' failed'.…
-
constant injection pressure
Hi all, I would like to simulate 1D soil grouting with chemical injection material. I'm using iTOUGH2 with EOS-GEL module. I have a constant injection pressure and wants to determine development of…