-
Tuning diffusion coefficients for water isotopes
Hi @Eric Sonnenthal I have a few questions about modeling diffusion for water isotopologues in an evaporating soil. Basically, the setup (following Singleton et al.…
-
TOUGHREACT compilation using gfortran MinGW-error message
Dear Community, I would like to compile TOUGHREACT (version: TR-OMP_Source_v3.3.2-OMP) using gfortran with MinGW. I typed make eos1 -f makefile_gf, and had the attached error message.…
-
TOUGHREACT using MINC MESH
I'm running a model about reactive transport in a fractured reservoir. I used MINC function to create the fracture system. However, I have to use 8 characters for the eleme names for the uniqueness…
-
How can I run the example problems in UBUNTU 20.04.2?
Hello, I am new to using ToughReact (V3.32), and I have no idea how to run the executable already read the installation file but, I have not been able to solve the problem. Use ubuntu 20.04.…
-
Looking for training sessions of Toughreact using Petrasim
Hi Everyone, I am new user of TR and I have research project that investigates CCS in Kazakhstan. Since the project can cover the training expenses, I would like to ask if anyone can explain how to…
-
CO2 solubility ECO2n carbonated water
Hi everyone, I'm working on CO2 mineralization in the subsurface where carbonated water is injected into reactive minerals, similar to the CarbFix project.…
-
TOUGHREACT v3.3-OMP and ECO2N
Hello everyone ! I would like to know which version of ECO2N module is currently sold with TOUGHREACT v3.3-OMP. Is it ECO2N v.2.0 ? Best regards, Maciej
-
EOS2 non-convergence
I'm new to TOUGHREACT and have built a simple mesh and created a temperature and pressure gradient with INCON. Now, I am trying to run flow.inp through TOUGHREACT (EOS2) before I move to the solute.…
-
Setting stack sizes when running v3.32-OMP in Linux environments
Hey everyone, I've noticed that the only way I've successfully been able to run simulations with TOUGHREACT v3.32-OMP in a Linux environment was by setting the stack size to unlimited ('ulimit -s…
-
TOUGHREACT - Dissolution and precipitation
Hi all, I am a new user of Toughreact. I am testing a real case dataset, whereas I want to quantify the amount of CO2 that will be mineralized in a mafic formation.…
-
What is the popular way to visualize 3D results from TOUGHREACT
Hi, I have unstructured grid created by GMSH, what is the popular way to visualize 3D results from TOUGHREACT I tried TOUGHIO, but it won't read my flow.out properly
-
How to simulate mixed gas injection with Toughreact v1.2
Hi I am trying to develop a model that is used to simulate a mixed gas to inject into a formation, and then get a gas-water- rock reaction model. The mixed gas includes CO2 and H2S and H2.…
-
TOUGHREACT/ECO2N:CANNOT FIND PARAMETERS AT ELEMENT * 1*
Hi Everyone, I'm new at using ECO2N of TOUGHREACT. And the following problem is encountered when I used PetraSim to simulate. It's a simple model. And I model a strata from -2260m to -2900m below…
-
Restart time in inchem file is not the same as starting time in INCON - 1D Radial CO2 injection - Problem 5
Hello, I removed the GENER block from the flow.inp file in order to run an equilibration simulation for 10,000 years. I then wanted to use the 10,000th year data to be used as my initial conditions…
-
Reconciling Flow and Chemical Inputs
Hello, I have a couple questions that are very basic and therefore hopefully rather straightforward for someone to answer. I am just getting started using TOUGHREACT,…
-
TOUGHREACT (v1.2) not considering fluid density due to salinity?
Hello, I am using EOS9 to model a plume of leachate entering the top of an aquifer to evaluate the resulting changes to water & mineral chemistry. I have noticed that when injected,…
-
TOUGHREACT error while loading shared libraries: libifport.so.5:, but used gfortran complied
I was trying to run some test files using treactv413omp_eco2n_linux, but I ran into the error: error while loading shared libraries: libifport.so.5: cannot open shared object file:…
-
Pressure drop using GENER
Dear Tough community, I'm trying to run a 1D simulation with initial and boundary waters. I'm using GENER to drive the flow. The program runs, but I get a drop in pressure for each step in flowdata.…
-
During CO2 sequestration at basalt formation, time step size rapidly decrease
hello, everyone. I am graduated student, during master degree. I'm constructing simulation model about basalt CO2 mineralization. I am utilizing TOUGHREACT 1.2.…
-
Mass balance issue on mineral phase during CO2 injection in radial system
Hi everyone, we use a typical case of CO2 injection (see details in Andre et al. 10.1016/j.enconman.2007.01.006) at 200 b in a radial system, so it was using the 2007 version of toughreact.…
-
Solute transport and shift simulation
Hello everyone! I recently used Petrasim2018 to solve the problem of the dissolution and precipitation of minerals. In the 3D results, I found problems with my results, as illustrated in the figure.…
-
Permeability-Porosity relation
I use the TOUGHREACT EOS1 to model chemical reactions in porous media. In the Permeability-Porosity relation, I choose the Verma-Pruess correlation. The equation is k/ki=(phi-phi_c/phi_i-phi_c)^n.…
-
No change in minerals vol. fraction
Dear All, I am a beginner in TOUGHREACT simulation and I have issues with getting results from simulation. This simulation performs simulation and there is no error indicated in the runlog file,…
-
PHYSICAL MEANING OF INPUT RECORDS
Hello, I am using Toughreact version 4.13 to solve CO2 storage problems. However, I still don't understand the physical meaning of PRIMARY SPECIES and AQUEOUS COMPLEXES,…
-
Stopping in main due to flow nonconvergence
Hello everyone, I am using ECO2N to simulate CO2 injection into a formation with relatively low permeability. I am having trouble with an error popping up.…