-
How to make a "no flux" grid?
Hello everyone! Now i have a injection well, i consider it as a kind of ROCK. ( I do not know whether this set is correct or i just do not need set the ROCK of the well.…
-
TOUGHIO CO2 Leakage Along a Fault Generate MESH and INCON files
What went wrong with this step?
-
TOUGHIO CO2 Leakage Along a Fault
TOUGHIO CO2 Leakage Along a Fault Generate MESH and INCON files In the second step, I showed that there was a problem with my index, but I checked the files and there was no problem according to the…
-
About the design of boundary
Hi, everyone, I'm working on setting the boundary conditions for no flow and constant pressure in a model using TOUGHREACT v1.2 ECO2N. I have two questions: For the no flow boundary condition,…
-
How to perform simulations of water-rock interactions to obtain near-equilibrium water chemistry.
Hello everyone, I am currently studying TOUGHREACT and using Petrasim for preprocessing and postprocessing, with the aim of researching CO2 geological storage issues.…
-
Output of permeability and initial value of porosity and permeability
Hi,everyone i am using TOUGHREACT v1.2/ECO2N, and i have some issues (1) i find that the file 'solid.out" only shows one permeability, what orientation it is ?…
-
About the SEED with porosity
Hi, everyone I'm using TOUGHREACT1.2/ECO2N with Petrasim,and i found that in Petrsim can set different porosity for each cell in "Set cell data", so I wonder how can I achieve that by text…
-
NUMBER OF ELEMENTS SPECIFIED IN DATA BLOCK "ELEME" EXCEEDS ALLOWABLE MAXIMUM OF 12000
I am trying to simulate a large grid model using TOUGH2. But I am getting an error as " NUMBER OF ELEMENTS SPECIFIED IN DATA BLOCK "ELEME" EXCEEDS ALLOWABLE MAXIMUM OF 12000 INCREASE PARAMETER *MNEL*…
-
possibly bug in viscosity calculation in TOUGH3_EWASG
Dear developers, First of all, I would like to say thank you for developing this excellent codes. Here I am reporting a tiny bug I found in viscosity calculation in TOUGH3 EWASG,…
-
From TOUGH3 to T2WELL conversion
Dear TOUGH communities, I have built a CO2 injection model in TOUGH3/ECO2M and it runs perfectly. However, I want to run exactly the same input using T2WELL/ECO2M, but the model fails.…