-
TOUGH 2 ECO2M temperature condition
Hi, It is described in the ECO2M user guide that TOUGH2 simulates CO2 migration under temperature condition up to 110 °C. I am wondering if the temperature condition is about 115 °C-125 °C,…
-
production mass volume calculation
Hi there, For a constant boundary pressure, and constant production rate gas reservoir, is there a way to tell how much gas and how much water produced from outputs? Thanks Jing
-
VOL. GENER TYPE
Hi everyone, Wandering in the t2f.f file, I found that there is a GENER type not referenced in the TMVOC manual : "VOL." I assume it allows specifying an injection or pumping volumetric rate.…
-
Problem with RF1 input file
Hello everyone, I'm starting to use TOUGH2 for the first time. I tried to run the sample-input file RF1, but the output file gives me an error and I don't know how to proceed.…
-
'nkdd' field in TOUGHREACT input file
Hi- I participated 2014 TOUGH(REACT) short course and new to here. I am using PetraSim only to generate basic input files and modify them to run on our university's cluster computer (PetraSim…
-
Dirichlet boundary
Hi all I am trying to make a boundary with pressure variations. I have two questions: 1- Should I just follow the equation 27 in TOUGH2 manual (ideal gas law)?…
-
Accessing gfortran and MPI on PC through the Cygwin environment
One option to get gfortran and MPI on PC is through Cygwin,a unix-like environment for PC. To setup an environment suitable for compiling TOUGH-related codes, please follow the following steps: 1.…
-
Tough+Realgasbrine
Hi there, I'm planning to attend the short course of Tough+Realgasbrine in September, is it a new module going to be released? Do you have any idea when will it be available? Thanks.
-
Convert TOUGHREACT output to Tecplot readable output
Has someone generated a utility to convert TOUGHREACT output files into files that are readable by TECPLOT? I found the EXT utility for converting TOUGH2 output into TECPLOT-formatted files,…
-
Steam Liquid coexistence
Hi, I’m a new Petrasim user and I would like to make some questions: I tried to build some geothermal model s and I have watched some tutorials and I’ve read some publications.…
-
MINC and low permeability case problem in Tough2
Hi All, I set up a case using the MINC with 2 continua. The first continua represents the fracture and the second one represents the matrix. For this case,…
-
A problem with my simulation with EOS9nT
I have some problems in my modelling project with EOS9nT. In my example I want to simulate the nuclide release and transport process in a disposal site with a 3-D model.…
-
version of shared libraries
I just tested the Linux executable of TOUGHREACTv3 on our Linux cluster and I got the following error message before it crushed: /home/ycda/bin/treactv3omp_eos1_linux_intel: /vend/intel/intel_cc_10.…
-
Problems precipitating phases at high ionic strengh using trpitz_v1.21
Hello everybody, I am working on a geothermal application and I try to model halite precipitation during the cooling of a brine in a borehole. Even when the brine is oversaturated by far with…
-
TOUGH2 post processing program in MATLAB with TMVOC
Hi everyone, I am currently using the TOUGH2 post processing program in Matlab by Antonio Rinaldi for TMVOC files. The READ_DATA function does not work when the command 'Compute Flow' is active.…
-
CHEMP.5 Record for new chemicals
Hi everyone, I am trying to add new chemicals in the CHEMP block but I have some difficulties with the CHEMP.5 record, i.e. about the ideal gas heat capacity constants.…
-
Is my result correct? My first time doing simulation with multiple layer of soil.
Hi everyone. This is my first time doing simulation with multiple layer of soil Previously I did with only one type of soil for 1m x 1m x 0.1m size of model, the result seem ok.…
-
Partitioning Tracer Test Modeling with TMVOC
Hi everyone, I was wondering how could I manage to model Partitioning Interwell Tracer Tests (PITT) with TMVOC. The main difficulty I am confronted by is the data of the partitioning and…
-
Recommendations on using TOUGHREACT to perfome reactive transport modeling of hydrogen in a depleted gas reservoir
Dear All, I am dealing with the problem of reactive transport modeling of hydrogen in a depleted gas reservoir. I was wondering if anyone has already done reactive transport modelling of H2 with…
-
TCE Spill: Problem n°5
Hi everyone, I use TMVOC to reproduce the problem n°5 in the T2VOC User's Guide with an additionnal VOC, which is PCE (tetrachloroethylene). I am a little bit stuck as I try to run the first part.…
-
Gravity equilibrium for case "*r1dv* -- CO2 Discharge Along a Fault Zone" using ECO2N and TOUGH2-MP.
Hi! I have some comments/questions regarding the gravity equilibrium for test case *r1dv* ,section 5.3.1 in the ECO2N user manual page, 39. Using the ECO2N module and TOUGH2-MP,…
-
How to set-up a model that reacts only on the surface
I am trying to set-up a model that simulates a leaching experiment. The material is very impermeable (flow is not supposed to go through) and based on existed data,…
-
Do you need to make a vertical fault with real geology in it?
If you need to add a vertical fault with real fault geology, that is a fault plain with material that changes from place to place, you may use the simple attached procedure to modify your GMS…
-
Difference between TOUGHREACT 1.2 and 2
Hi all, I am observing quite different (quantitative) results between 0D and 1D simulations run with the 1.2 version of TOUGHREACT/ECO2N and the 2.0 version.…
-
run time error M6201:math
Hi! Can anybody help we with this error. (error message is in the attached picture) I changed my 1D model from horizontal to vertical and this error comes out during running the new input file.