-
How to set SAVE_Frequency =500 in Input File-T+H Simulation
Hello Lately, i have been tryin to set the SAVE_Frequency parameter to set the writing of SAVE file recurringly, i.e., to update in order to prevent loss of data.…
-
Mesh is truncated-Meshmaker v 1.5
Hello everyone. I am trying to create a mesh, R=200m and Z = -190m. It has multiple layers. I have added all the info and the file runs, but the mesh is created only up to a depth of -94m and no more.…
-
Gas production units in TOUGH+ is it m3/d or Sm3/d in Hydrate_Status : T+H v 1.5
I am trying to figure out whether T+H v 1.5 reports Sm3/d in Hydrate status file or simply m3/d. If it is m3/d then how do i get the necessary Thermodynamic variables to change it to Sm3/d.…
-
Re: Tough+Hydrate Model Initialization to Steady state : Pressure gradient appears but Temperature gradient disappears
@kenny Hi I want to ask you whether the process of getting steady state temperature and pressure distribution can be achieved in a single step? or pressure gradient achievement is to be done in a… -
Why MESHMAKER not writing MATERIAL to MESH file: 2D Radial heterogenous Mesh: what is wrong?
hello moderator/everyone i adapted TSN_Radial example from MESHMAKER V1.5 example: but when i run it, it makes mesh file but it it it does not write material to mesh file.…
