-
No error, nothing... Why this file refuses to Run? Tried everything, but it just wont run.
I am modeling a R-Z system(100-X, 190-Z). There are just three layers, TOPSD, BOTSD, and HYDRL, apart from thin top and bottom cell. Everything is setup correctly.…
-
Tough+Hydrate Model Initialization to Steady state : Pressure gradient appears but Temperature gradient disappears
Hello Everyone. I am trying to run the model to steady state. I have a 190 x 1000 model. I fixed the top boundary to 6.5C and 104bar by making the cells inactive I set simulation end time to (10,…
-
Tough+Hydrate not running 10k+ mesh on windows, How to compile source code on ubuntu
Hello Toughers. My simulation runs great if number of mesh elements is less than 10k. I have computer with 16gb RAM. I read solution is to compile source code on Ubuntu.…
-
Quick Initialization, got P-T, but how to use it/load it in 2D or 3D model
Hello everyone I ran a quick 1D initialization of TOUGH+ simulation to get P-T distribution. However, i am stuck at what to do next. How do i use it in my 2D or 3D grid.…
-
Vertical well and Perforated interval
hello Everyone, am trying to model an R-Z system with a vertical wellbore for depressurization using lower bottom hole pressure I am confused as to what boundary conditions and how to set these.…
-
Well_Time_Series or Interface_Time_Seres.....What are these outputs....where to find description
Hello Toughers I ran simulation and i am having a hard time understanding the differences between the different headers listed in the interface output file which list production form the well…
-
TOUGH + Phase equilibrium Relationship...where am i wrong?
TOUGH+ has two phase equilibrium relationship 1. Kamath 2. Moridis I tried plotting Moridis Generalized equation taken for the manual and i find that its plot is different from the pic in the manual…
