-
Specifying material types for stratified heterogeneous reservoir
Dears, I am trying to model CO2 injection in heterogeneous aquifer that is composed of 23 layers with different porosity, permeability, and capillary pressure data.…
-
Cross flow between stacked layers
Dears, Is there is a way in TOUGH3 to output mass flow rate between stacked layers (NOT grid cells) with time?
-
Technical question regarding mass conservation in TOUGH3
Dears, I am trying to model CO2 injection in brine saturated aquifer using a 1D radial model. CO2 is injected with a constant rate (10 kg/s). Rate distribution throughout the reservoir in my case is…
-
Specifying an injection well with a constant volumetric rate
Dears, I wonder if it is possible to define an injection well with a constant bottom hole injection rate (volumetric rate NOT mass rate) in TOUGH3/ECO2N using the GENER data block.…
-
Generation Time Table
Dears, I have this problem while constructing the generation time table using (GENER). I have a table of 5 time-points (rows) which is illustrated below. When I run the code, it crashes.…
-
How to deactivate the mutual solubility of CO2 - Brine mixture in TOUGH3/ECO2N
Dears, I am trying to model CO2 injection in saline aquifer reservoir. I would like to know if there is an option in TOUGH3/ECO2 to deactivate the mutual solubility between CO2 and brine.…
-
Parallel execution of simulation using TOUGH3 in windows
Dears, I am trying to run a simulation case using TOUGH3/ECO2 in windows and the simulation run lasts for a long time (more than 24 hr for numerical model 1650*10 grid blocks).…
-
Output the spatial results for specific layer
Dears, I would like to know if there is a specific way to print out the results (spatial results at a specified time) for a specific layer of grid cells.…
-
How to identify the cause of an incomplete simulation run
Dears, I have a problem to identify the cause of the incomplete simulation run for the attached input file. The simulation ends before the specified total simulation time without error messages!…
