EOS7C - time stepping problem
I am using the EOS7C to simulate a pumping test (production well) in coal seam gas aquifer with hydraulic fractures.
I used automatic time stepping (MOP (16) = 2), TMAX= 30 days and DEL1= 1 day with 30 time steps (MCYC=30).
After running my model, I got results for first day (0.100000E+01 DAYS), second day (0.200000E+01 DAYS), third (0.300000E+01 DAYS) day and fourth day (0.400000E+01 DAYS).. after 4th day the length of time steps were decreased to:
0.425000E+01 DAYS, 0.450000E+01 DAYS, 0.475000E+01 DAYS, 0.481250E+01 DAYS, 0.487500E+01 DAYS, 0.490625E+01 DAYS, 0.496875E+01 DAYS, 0.497656E+01 DAYS, 0.497754E+01 DAYS, 0.497803E+01 DAYS, 0.497827E+01 DAYS, 0.497828E+01 DAYS, 0.497829E+01 DAYS, 0.497831E+01 DAYS, 0.497834E+01 DAYS, 0.497840E+01 DAYS, 0.497852E+01 DAYS, 0.497877E+01 DAYS, 0.497926E+01 DAYS, 0.498023E+01 DAYS, 0.498219E+01 DAYS, 0.499390E+01 DAYS, 0.500953E+01 DAYS, 0.504078E+01 DAYS, 0.505640E+01 DAYS
after KCYC=30 the program was stopped.
This problem might be from convergence failure or something else.
Please let me know if you have any experience about this problem and how can I fix this?