
GENER block injection fluid
Hello,
There is an option for injection component on the TOUGH+HYDRATE GENER data block defined by COM1, COM2, COM3, etc. However it doesn't specify how we can inject a particular fluid into an element. So, for example if I am working with methane gas hydrate and I want to inject methane gas into an element, how do I specify if it is methane or water (though there is an option WATE or COM1 for water injection)?
Or if I want to inject a combination of gases (for example 50% methane and 50% ethane) into that element, how do I do it? Is there an option to define the chemistry of the gases that I am missing so far? Or do I have to tweak the original code for this? Please let me know if anyone has any idea on it.
Stefan Finsterle I'm sorry to mention you here but the TOUGH+ forum is awfully quiet and since the GENER block is also used in TOUGH2, I thought may be you have some answers.
I am using the TOUGH+HYDRATE v1.5 academic license and I haven't made any changes to the original code so far.
Thanks
-
George Moridis Thank you Dr. Moridis for the clarification. I still have one confusion regarding the issue. I am using the SS_GROUP option to define a group of injectors and the ssgroup_Time_Series file that is generated is showing zeros for all the columns despite giving a constant rate of injection GX in the GENER block. I have tried both COM1 and COM2 as SS_type. The time series file, however, shows heat rate Q_H when I specify the enthalpy, EX of the injected fluid.
Could you please shed some light into that particular issue?
Thanks