Data file Problem No.6 (*Case6_50kg_DP*) needed
Hello all. I am trying to run an EGS-CO2 model with TOUGH2 ECO2N. Is the example file
Problem No.6 (*Case6_50kg_DP*) – GCS/GHE with a double-porosity reservoir
in the manual available? I have bought TOUGHREACT licences and I want to run ECO2N through TOUGHREACT.
Helps appreciated dearly.
5 replies
-
Hi Masoud,
I am looking into finding this test problem, and will get back to you as soon as possible. This is not a problem I have used with TOUGHREACT, but it should run fine if it was run previously with TOUGH2.
There are 3 sample problems using ECO2n that are in the TOUGHREACT V3.0-OMP distribution (Problems 5, 6, & 12), which you should be able to convert to double porosity using the MINC option described in the TOUGH2 Manual.
regards,
Eric
-
Hi Masoud,
Case6_50kg_DP is a test problem for ECO2n V2, which has not yet been ported to TOUGHREACT. Probably your best option is to modify one of the existing ECO2n sample problems. ECO2n V1 has a temperature limit of about 105 deg C.
regards,
Eric
-
Hello Eric, many thanks for replies.
So if one wants to work with CO2-EGS reactive or non-reactive flow for T > 105 deg C without ECO2n V2, it is not possible to use TOUGHREACT-ECO2n? How about EOS2? (partial pressure of CO2 should be less than 5 bar, right?
Regards
Masoud