0

iTOUGH2 work with EOS7C

Hello,

I am new to iTOUGH2 and wanted to estimate parameters in a model with EOS7C module. I learned from the iTOUGH2 users guide that the maximum number of primary variables (MAXPV) is 4. However, in EOS7C, there are 6 primary variables (gas phase pressure, mass fractions of brine, NCG and TRC, gas saturation and temperature).

I only have executable iTOUGH2 (no source code). Does it mean I cannot run iTOUGH2 with EOS7C module in the forward simulator? 

Thanks,

Haiyan

6 replies

null
    • Finsterle GeoConsulting
    • Stefan_Finsterle
    • 1 yr ago
    • Reported - view

    Dear Haiyan,

    If you have a standard version of iTOUGH2, you can certainly run an EOS7C model. You don't need the source code to recompile it, as all arrays are dynamically allocated. I'm not aware that iTOUGH2 gives you a message that it is limited to 4 primary variables (because it is not, unless you only have an evaluation license). Have you tried running iTOUGH2-EOS7C?

    Stefan

    • Haiyan_Zhou
    • 1 yr ago
    • Reported - view

    Dear Stefan,

    Thanks for your reply.

    I think we have a standard version of iTOUGH2 but will confirm with my supervisor. I haven't run iTOUGH2-EOS7C yet and I just learned about the max number of primary variable from the user manual (please see attached screenshot). I sure will try iTOUGH2-EOS7C later.

    So does it mean the 'Maximum number of elements' is not constrained to 4000 too?

    By the way, what is the module number of EOS7C in iTOUGH2 command, for example, 1 for EOS1, is it '7ca' for EOS7C?

    Regards,

    Haiyan

    • Haiyan_Zhou
    • 1 yr ago
    • Reported - view

    Sorry I mean '7c' instead of '7ca'

      • Finsterle GeoConsulting
      • Stefan_Finsterle
      • 1 yr ago
      • Reported - view

      Haiyan Zhou 

      Dear Haiyan,

      This section of the manual indicates that you could change any of these parameters through the input file, if needed.

      In case you run into problems, contact me directly at stefan@finsterle-geoconsulting.com.

      Stefan 

      • Finsterle GeoConsulting
      • Stefan_Finsterle
      • 1 yr ago
      • Reported - view

      Haiyan Zhou 

    • Finsterle GeoConsulting
    • Stefan_Finsterle
    • 1 yr ago
    • Reported - view

    Yes. The EOS ID is 7c.

Content aside

  • 1 yr agoLast active
  • 6Replies
  • 35Views
  • 2 Following