Incomplete simulation run

Please check that the radial spacing of your grid is what you really want.  You start with a well radius of 0.3 m, and according to the MESHMAKER input appended to your input file, you ask for 1000 elements between the well and r=10 m with logarithmic spacing.  This causes the elements to get very small.  I recommend you try different parameters in MESHMAKER and then check that the grid it produces makes sense.  When using a radial grid, I usually try to get a gradual increase in radial spacing, maybe a factor of 1.05 to 1.1, between blocks (the MESHMAKER output will tell you what increase factor it calculates).  Unless I have specific requirements for grid resolution at different radial distances, I usually just use one LOGAR block in MESHMAKER.  One good reason to use two LOGAR blocks would be to achieve a finer grid in the region where CO2 goes, and a coarser grid beyond that for the pressure calculation.  But then you have to look at the transition between the two regions and make sure the grid spacing is reasonable.