Simulation stops automatically at (9999,9)
Greetings,
I have developed a field scale stacked reservoir model to simulate the flow and transport of sc-CO2 in the subsurface. In my model, the domain is 1 km in lateral extent and vertically it is 50 meters, composed of 5 layers. The injection rate is 10 kg/s.
The model stops automatically while reducing time step at (9999,9) (Figure attacthed). In the modelling framework, I have selected maximum number of time step as infinite (Figure attached). Can anyone suggest why the model is stopping at this particular time step and not going beyond that?
3 replies
-
you may directly edit the input file (INFILE?), let MCYC=-100. The code will run 2^(100) time steps after setting MCYC=-100.
-
Many thanks for your reply and suggestion. I tried to follow that, but it seems like MCYC can not be set to =-100 in the software directly, as it does not allow for a negative value and in the INFILE, I could not find a parameter called MCYC. I have attached an INFILE from the simulations that I have ran so far. Can you please help me on this?
-
Hi, instead of 9999 highlighted in the snippet below, put -100 or any other negative values. the number of timesteps will be 2^100 as Kenny suggested. I used -30 and it worked for me.
-