-
The extent of CO2 injection cooling using ECO2N
Hi all, Aiming at thermal QC of another code by using Tgh2-ECO2N, I made a simple coarse model with dimension 25x5x100 where dx=dy=200m and dz=4m, por & perm were 0.…
-
Salt precipitation dependency on rate (and grid size)
Hello folks; This is about testing salt precipitation in a 1D radial model with a single injection well at its center using ECO2N where capillary forces included and a pressure release well put on…
-
Temperature limits of various ECO2N versions
Hi Folks, Anybody can send me a few words on this: We have a version of ECO2N (as a part of iTough2.7.0.) which doesn't perform with T>103.4, same indication seen in CO2Tab data that is limited to…
-
Mole fraction Output from ECO2N
Hello Trying to get CO2 mass- and mole fraction in aqueous phase and H2O mass- and mole fraction in gaseous phase from a run with iTough2 and ECO2N in a simple radial 1D model where dry CO2 injected…
-
Alternative for running immiscible brine-CO2 system
Hello folks, Sometimes you may need a reference or a benchmark to see the effect caused by implementation of an EOS as a whole. For a Brine-CO2 system, even unphysical,…