TOUGH Website

How to enable Javascript

Latest Posts

Re: Natural State geothermal model calibration using itough2 @Melissa De Freitas Hi Melissa, if you are willing to use GMS for preparing and populating the input grid to tough2 or tough3 and display the output I have written two simple codes to do this and I…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 3 yrs ago
- iTOUGH2
- Reported - view
Re: Natural State geothermal model calibration using itough2 I, my self, use GMS form Aquaveo both for pre- and post-processing. It is actually very useful for producing original state of geothermal fields. This is the way I do it.…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 3 yrs ago
- iTOUGH2
- Reported - view
Re: Creating an angled domain I am going to send it to your email... Andrea
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- 1
- TOUGH2
- Reported - view
Re: Creating an angled domain Sulav, to create such a grid, there are a number of ways to do it, but usually you need a software to help you in this. One of the possible softwares is "wingrider" or GMS or LeapFrog (perhaps also…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) Nathan, I see a number of things that can perhaps create problems. In the PARAM block you have defined the primary variables for EOS2 as: 150. 0.001 4.…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) Can you send me the output file from this input, please?
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) @Nathan B. Nathan, What EOS module are you using? Andrea
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) @Nathan B. Nathan, can you compare your Input file to that of problem 4? What do you find different? Can you run correctly the exact problem 4?
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) @Nathan B. did you check your sign in GENER?
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: 9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2) @Nathan B. Dear Nathan, sorry if I step into this conversation. In your case start from a very simple case, too many things could be wrong... Can you run the 5-well-problem of the TOUGH2 manual…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGH2
- Reported - view
Re: Post and Pre-Processing free codes for TOUGH2 Could you please send me an output from the tough+ model? I just want to check how different is the TOUGH+ output from the TOUGH2 one. What EOS are you using with TOUGH+ I am very exited in trying…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- Pre & Post Processors
- Reported - view
Re: Post and Pre-Processing free codes for TOUGH2 In case you can or want to use GMS as a pre and post processor for TOUGH2, I can provide free copies of the software that I wrote to you.
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- Pre & Post Processors
- Reported - view
Re: Pre- & Post- processors - What are their Pros and Cons? Dear Ella, In the past for similar problems I have used GMS (Groundwater Modeling System) from Aquaveo. GMS is not free and has very powerful geologic and conceptual modeling tools for pre- and…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 4 yrs ago
- TOUGHREACT
- Reported - view
Re: permeable faults modelling If your fault is linear and does not bend too much, an easy way to go around this problem is to rotate your rectangular grid acting on the BETAX variable of the CONNE block so that gravity becomes…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 5 yrs ago
- TOUGH2
- Reported - view
Re: Using the GMS for TOUGH2 visualization Hi Sarah, TT2M works with a GMS grid. It converts the TOUGH2 node data to a “3D scatter point” file that can be imported into GMS. Then for visualization you need to interpolate this 3D scatter…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- Pre & Post Processors
- Reported - view
Re: Encounter problems using TMT2 - I do not get "*.ghb" --> Il try to guess what the problem is. Before exporting in Native format you must run a MODFLOW simulation. This is because the correct files are actually read by MODFLOW…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- Pre & Post Processors
- Reported - view
1
Do you need to make a vertical fault with real geology in it?
If you need to add a vertical fault with real fault geology, that is a fault plain with material that changes from place to place, you may use the simple attached procedure to modify your GMS…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- 902
- 1
- Pre & Post Processors
Re: TMT2: GMS file format? Amount of cells in y? Christoph, I know for sure that each Modflow pre- and post-processor have slightly different file format. The differences can arise because a number of tricks are used to reduce file size.…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- Pre & Post Processors
- Reported - view
Re: Well Connection As an alternative, that worked for me, you may also work directly on the TOUGH2 files (it may appear difficult at first, but the results overwhelm by far the initial discourage you may experience)…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- TOUGH2
- Reported - view
Re: Need help on using Ext.exe to generate Tecplot input file When asked for the coordinate system you should put the corresponding number ("2" I guess from your input "X Z" ?)
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- TOUGH2
- Reported - view
Re: Need help on using Ext.exe to generate Tecplot input file Hi Fang, I like to get into this discussion because yours is a problem that everyone that is trying to learn TOUGH2 is confronted with. TOUGH2 is not just a modelling code where you can "jump in" and…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- TOUGH2
- Reported - view
Re: Do you need a pre- and post-processor for tough2? Try GMS. Hi Elena, To use GMS as a pre- and post-processor for tough2 you have to create a geologic model with GMS. Then you have to map this model on a rectangular Modflow grid (each layer of the grid,…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- Pre & Post Processors
- Reported - view
Re: Do you need a pre- and post-processor for tough2? Try GMS. Konstantinovskaya Elena <Elena.Konstantinovskaya@ete.inrs.ca> Asks the following: I am looking for the grid generator software that would be compatible with TOUGH2 et FLAC3D.…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- Pre & Post Processors
- Reported - view
0
Do you need a pre- and post-processor for tough2? Try GMS.
Do you need or like to work with: Complex geology? Conceptual modelling? Statistical analysis? Original TOUGH2 formats? Then one possibility is to use GMS as a pre-and post-processor.…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 7 yrs ago
- 5 replies
- 3,091
- Pre & Post Processors
Re: Defining a multi-layered aquifer in TOUGH2 If you would like to get fancy and have access to GMS (Groundwater Modelling System) you can create your geologic model and grid in GMS and then translate all the files in tough2 format using TMT2;…
- Andrea Borgiamoderator
- geologist
- Andrea_Borgia
- 8 yrs ago
- TOUGH2
- Reported - view

Back to top

moderator

Andrea Borgia

Andrea_Borgia

geologist

EDRA - Roma - Italia

25
2
0

Follow