-
Cooling cell
Hello and thanks for maintaining this forum, very useful indeed. I am running a variation of the 5 spot problem in Toughreact. Essentially this is a polygonal mesh and there is a 10 meter high…
-
Input file
Hi I got an input file that some cells are not included in ELEM block; however, they have some connections with other cells. Does it have any meaning or it is a mistake in making input file? Cheers
-
Restart timestep
When restarting a run after long time calculation (e.g.1000year) and continuing the run until 10000year, I can't start the restart run properly. In the SAVE file,…
-
Question about Restart in TOUGHREACT
Hello Everybody, I am struggling to get running a restart and I would really much appreciate your insights. I'm using eos1 in toughreact_V2. The first run is a 2d model in which I have 8 minerals,…
-
hi, I got interesting reseult seneario forecasting with fracture spacing(MINC) using Monte Carlo simulation.
I also want to estimate fracture volume, but it seems iTOUGH2 can estimate only fracture spacing. if it is possible to estimate fracture volume with iTOUGH2, please advice me. Thank you.
-
MINC
Hi For modeling the topsoil cracks using MINC, what should be the number of continua? I think that two is fine, but is it? How can I apply the fracture to a certain number of cells?…
-
Encounter problems using TMT2
I use TMT2 transform between GMS & TOUGH2 coded by Andrea. Got some problems: "*.ghb" is used for reading constant-head elements. However, I do not get "*.ghb" after "Export Native MF2K text...…
-
Using MINC to represent groundwater flow in fractured porous media
Hello, I am investigating whether TOUGH2 will enable better characterisation of groundwater flow than more basic, single porosity packages like MODFLOW.…
-
Increasing the number of rock materials
Hi everyone, I am working with TOUGH2/EOS7C. I need to use 44 different rock materials in the ROCKS. I am wondering if there is any way that I can increase the number of rock materials from 27 to 44…
-
Can anybody explain the meaning of DELV in GENER?
I'm not very clear about DELV and EX, can anybody help me? thanks very much! sawyer
-
permeable faults modelling
Hi there, Do you have any suggestion on modelling inclined permeable faults in tough2 model? how to refine faults zone only? Thank you very much Jing
-
Mass out problem of Sources/Sinks about drawdown
Hi everyone : I am trying to pump water and create drawdown in TMVOC I have a question about the pump water. My pump water point is below free water level 1m and want to create 1m drawdown.…
-
Running sample problem 7
On page 109 of the User's Guide, it is mentioned that 'Small changes were made in subroutine GXYZ of the MESHMAKER module meshm.f to obtain the domain assignments' but the changes themselves have…
-
Restart problem
Hello, I am running a series of simulations which were running well until the last restart. With the most recent restart, when I wish to restart the program immediately stops and gives this error…
-
problem with initiatal conditions eos3 diffusion of water vapor in water in unsaturated soil layer
Dear moderators in my problem i have to solve the diffusion of water vapor in water in unsaturated zone attached are the input file and mesh file i could not find the problem even i tried for long…
-
Mass Balance for trace gases in TOUGHREACT V3-OMP
Dear colleagues, I stumbled about a little problem concerning the mass balance for trace gases using the new TOUGHREACT V3-OMP version. I am simulating the injection of CO2 containing trace gases…
-
time step control
Hi! Is there any way to make a simulation going on even if convergance occured on the first itteration for 10 time steps in a row ?
-
STIMAX parameter: Which ionic strength is considered?
Dear all, I have a question concerning the STIMAX parameter in the solute.inp file in record 3. As described in the TOUGHREACT V3.0 manual, STIMAX acts as:…
-
simulating diffusion process in long time (near equilibrium) with TOUGH2
Hi! I am trying to simulate a simple diffusion poblem with TOUGH2. I am using EOS3, I can't get any results for long term (near equilibrium time which is in my problem around 80 days).…
-
Compiling and Running TOUGHREACT v3.32 using Ubuntu/Linux
Hey everyone, I've been able to get the newest version of TOUGHREACT working with my workstation, which has Linux/Ubuntu (v 17.04) as its OS. Setting things up didn't go without hitches, though,…
-
No Temperature change in iTOUGH2 forward model run, problems with atmospheric blocks
Hi Stefan, I currently have a couple of issues when running iTOUGH2 in forward mode, especially when trying to add topography (done using PyTOUGH). Often my outputs will simulate fluid flow and…
-
Error Message - out of range in SATB
My simulation of injecting co2 into a homogeneous reservoir using eco2n stops with the error message: +++++++++ REDUCE TIME STEP AT ( 50, 1) ++++++++++++++++ NEW DELT = 0.…
-
Initial Geochemical Equilibrium between Minerals and Brine
Hello there, I'm simulating CO2 injection into sandstone aquifer of synthetic brine, NaCl. I've read in several papers in which TOUGHREACT w/ ECO2N is used and something is mentioned like "batch…
-
Problem 4 (*rtp7*) - CO2 Injection into a 2-D Layered Brine Formation. What is the purpose of additional items in FOFT keyword?
Looking at "Problem 4 (*rtp7*) - CO2 Injection into a 2-D Layered Brine Formation" for the ECO2N module: The provided input file (INFILE) has the following FOFT section:…
-
9.4 Problem No.4- Five-spot Geothermal Production/Injection(EOS2)
Dear all, I have been studying and trying to run this problem example in the manual cause it is similar to my Project. I'm trying to view the simulation results using TOughViewer.…