Error in Output File EOS1

Hallo team,

I have problem with output result of my current model which is created in Petrasim. I generated TOUGH2 file (.dat) of the model. I tried two ways to get the result: I ran model using Petrasim and TOUGH2 command using the same input file. 

The output file has a different result. The output file from Petrasim simulation is succesfully completed with no error. However, the output file from TOUGH2 command has notification of unknown material. For your info, I created 32 material (rocks) type in the model. So, the following is the notification from the second output:

WRITE FILE *MESH* FROM INPUT DATA
REFERENCE TO UNKNOWN MATERIAL LOF12 AT ELEMENT     5 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL HS1   AT ELEMENT     6 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL BASE1 AT ELEMENT     7 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL LOF11 AT ELEMENT     9 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL LOF10 AT ELEMENT    13 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL LOF9  AT ELEMENT    14 --- WILL IGNORE ELEMENT
REFERENCE TO UNKNOWN MATERIAL UOF1  AT ELEMENT    17 --- WILL IGNORE ELEMENT 

What I did:
1. I change all seven (7) materials above with new materials, then I run again with TOUGH2. The result is similar: I have notification like that with the other seven (7) materials (rocks) type. I did the previous act, change those unknown materials type. Unfortunately, after the simulation by TOUGH2, I get the similar result with the other different materials error.

2. I search the problem discussion from web and TOUGH2 manual, no result.

So, I thought that, maybe TOUGH2 has limitation of maximum rocks number (25 items). Anybody has similar experience? Thanks in advance.

*I attached the input file (Run0.dat) and both result, from TOUGH2 (Run0.out) and Petrasim (Run001.out)