1

T2Well questions

Hi there,

 

Starting to play around with T2Well and having good fun. ;)

 

Two things (at least) that I didn't understood:

1- ROCKS data block: the domain name for wellbore cells starting with 'x'. What are they representative of in practise? a wellbore filled of gravel?

2- ELEME data block: negative value of AHT represents a section of an annulus and the absolute value of AHT is the outside diameter of the annulus (from T2well manual). Does that means that we can account for circulation outside this cell with friction losses?

Is there any publically available dataset using these out there please?

 

T2Well was originally written with ECO2N v1. Is there an existing version with ECO2N V2 and/ or ECO2M maybe?

Thanks!

 

Kind regards,

Ludo

4 replies

null
    • Lehua_Pan
    • 5 yrs ago
    • Reported - view

    Hi Ludo,

    1. Rock "x" was designed to simulate special sections of a well which has larger pressure loss, such as a nozzle, a choke, including the section filled with gravel possible in some broken well although the newer version offers different (maybe better) ways to simulate such cases.

    2. Negative value of AHT was designed to account for the correct side surface area of an annulus if the formation around the well was not explicitly included in the mesh (e.g., a well only mesh and heat exchange between well and formation is calculated analytically). If both the well assemble and the formations are included in a mesh, negative AHT is not needed because the geometry information of the annulus can be calculated from the information contained in the mesh.   

    3. We do have T2Well incorporated with ECO2N V2 but it has not yet been released to public though. However, it is possible to make it available to our collaborators.  

    Thanks!

    Good luck!

    Lehua

    • Ludovic_Ricard
    • 5 yrs ago
    • Reported - view

    Thank you. It makes a lot of sense. I really like the possibilities that offer the Rock "x" option.

     

    Best,

    Ludo.

    • Godarzi_K
    • 3 yrs ago
    • Reported - view

    Hi guys,

    I noticed your exchange from 2 years ago and "x" issue above regarding possible high pressure loss. I assume you are more familiarized with T2Well now than you were back then.

    Thought to ask you about inclusion of "Joule-Thomson" effect in T2Well both over chokes (or wellbore restrictions) and porous plug (sand face). Is this thermal phenomenon either standalone or in connection / association with non-darcy condition in highly heterogenous completion zones have been addressed by any version of "Tough+T2Well"?

    More questions

    Have any of you used T2Well-ECO2M coupled with Tgh2 or Tgh3 and how did you experienced it?

     

    I appreciate your feedback

    Godarzi

    • jerryjames
    • 2 yrs ago
    • Reported - view

    Very information article.

Content aside

  • 1 Likes
  • 2 yrs agoLast active
  • 4Replies
  • 334Views
  • 4 Following