-
About TOUGH+HYDRATE error
Hello, I have a question about TOUGH+HYDRATE(T+H). I want to run cartesian model (gird : 57x57x61(total about 200000). But T+H doesn't operate, and I get the following error message on the terminal:…
-
Importing of pore-pressure obtained from T+H simulation to FLAC-3D
Hi all, Can someone help me with the python script for importing pore-pressure obtained from T+H simulation to FLAC-3D? Thank you in advance.
-
Specify the time-dependent pressure boundary condition in TOUGH+HYDRATE
Hi, everyone Can I set a time-dependent pressure boundary condition in the TOUGH+HYDRATE? I wonder if it is possible to decrease the pressure of the production well over time. Thanks!
-
HOW DOES THE ELEME BLOCK WORK? (NOVICE ALERT!!)
Hi guys, I am a novice in using T+H. Could someone explain to me the values in the ELEME block input file for the Test_1T Problem in the Manual? Also, in the CONNE block,…
-
How to set SAVE_Frequency =500 in Input File-T+H Simulation
Hello Lately, i have been tryin to set the SAVE_Frequency parameter to set the writing of SAVE file recurringly, i.e., to update in order to prevent loss of data.…
-
About the max computable number of elements.
I have the academic version of TOUGH+HYDRATE. I can only compute less than 10000 elements in windows10, and no more than 30000 elements. I want to know how can I compute more than that.…
-
Permeability (I) for a 2D cylindrical model
Hi, I have a query regarding initializing anistropic permeability in ROCKS for a 2D cylindrical geometry model. In the 3D case it is quite clear that PERM(I); i =1,2,3 stand for permeability in x,y,…
-
How to handle convergence
I am using a simple 2D grid to simulate the growth of hydrates after some gas injection occurs in the system. Ideally I would like to shut down the source (injector) and let the system evolve with…
-
how to define MOP
Hi all, I am a very fresh user and have some difficulties specifying MOP . TOUGH+ manual contains few examples of input files. I have read those and found myslef completely confused about which part…
-
Gas production units in TOUGH+ is it m3/d or Sm3/d in Hydrate_Status : T+H v 1.5
I am trying to figure out whether T+H v 1.5 reports Sm3/d in Hydrate status file or simply m3/d. If it is m3/d then how do i get the necessary Thermodynamic variables to change it to Sm3/d.…
-
Tough+Hydrate not running 10k+ mesh on windows, How to compile source code on ubuntu
Hello Toughers. My simulation runs great if number of mesh elements is less than 10k. I have computer with 16gb RAM. I read solution is to compile source code on Ubuntu.…
-
Well_Time_Series or Interface_Time_Seres.....What are these outputs....where to find description
Hello Toughers I ran simulation and i am having a hard time understanding the differences between the different headers listed in the interface output file which list production form the well…
-
INITIALIZATION ERROR
Hello All, @Kenny or anyone pls find attached my input file for tough+, i just finish inserting all my parameters from the MEMORY block using equilibrium with inhibitor,…
-
Simulation Stopped without Error
Hi, everyone. I am trying to make simulation model for hydrate production with depressurization method using TOUGH+HYDRATE. To do this, I made 2D radial model (150*170 grid cells) to simulate the…
-
The order of ELEME and CONNE will influence computation results
I used to think that ELEME and CONNE can be arranged in arbitrary order as long as the blocks provide same information, but recently I found changing the order of ELEME and CONNE can significantly…
-
A question about computational parameters
If a simulation time is taking too many tile steps until it reaches the Max_NumTimeSteps parameter, but it has covered only a short of time simulated, what can be done in PARAM to optimize this.…
-
Unexpected gas phase evolving
In a simulation case where no gas is defined nowhere in the initial conditions (Aqu with X_m_A=0) I am getting some values of gas at during the simulation.…
-
Injecting Methane in TOUGH+RealGasBrine model, but none appears in output
Hello, I am trying to run a simple 1-D model in which I inject gas phase methane into an initially water-saturated column of rocks. I have been able to model this system using TOUGH2-EOS7C and…
-
Porosity reduction by hydrate/ice deposit
Hi, I have a question regarding the porosity reduction of a rock after hydrate/ice formation. I see that there is the compressibility and expansivity option on the ROCKS data block which determines…
-
Compiling/Executing TOUGH+RealGasBrine - Also, Hysteresis?
Hello, I would greatly appreciate some help getting TOUGH+RealGasBrine running on my PC. Below is a summary of the things I have tried so far without success:…
-
Where to find input files for Tough+Hydrate v1.2 version, other than the ones in the manual?
Hi everyone, Does anyone know of a website where I could find input files of 1.2 version in order to compare to the examples in the manual? Or better still, can anyone post me their input files?…
-
Ice in porous media T+H
Is it possible to model gas hydrate simulations in ice-bearing layers? Although there are different ice phases in TOUGH+HYDRATE, when we add ice into the system we got convergence failure problem.
-
Difference between Tough+hydrate v1.2 and v1.5 version
Is there a reason why Tough+hydrate v1.2 can open some files and Tough+hydrate v1.5 can not?
-
Quick Initialization, got P-T, but how to use it/load it in 2D or 3D model
Hello everyone I ran a quick 1D initialization of TOUGH+ simulation to get P-T distribution. However, i am stuck at what to do next. How do i use it in my 2D or 3D grid.…