-
Can we used a Neumann boundary condition for temperature simulation in TOUGH2?
If I know the heat flux (18 W/m^2), should I use the Neumann boundary condition? can I use it in TOUGH2? Thanks
-
Calculating flow rate in a well on deliverability model
Hello everyone, I am trying to figure out the best way to calculate gas flow rate in a well. my approach is to first print out a COFT file and then sum up the values of flow rate between cells.…
-
methane leak and plume migration in subsurface from hydrocarbon wellbores
Hi There, I would like to know what module would be best to simulate methane leakage and plume migration in the subsurface from hydrocarbon wellbores? I did some digging and came across some…
-
General question about Capillary Pressure
In terms of flow I still struggle to understand the reasons/use of having capillary pressure as an option in ROCKS. How different is flow when it is disabled?…
-
TOUGH2; grids; running time too long
Hi! I used TOUGH2 for a transient fluid flow analysis (total time for 1 year) using grids showed in the figure. Element volumes range from 1.0e-04 to 2.0e-1.…
-
Steady-state simulation of a low-type geothermal system
Dear TOUGH2 Users Good morning/afternoon This is my first post to this forum and I’d like to receive guidance and help to perform a steady-state natural simulation model of a low-type geothermal…
-
In-situ Combustion for Oil and Gas
Hi everyone, My company is considering to get a TOUGH license and wondering if it is suitable for our project. I am wondering if we can use it for in-situ combustion for oil and gas extraction.…
-
representing an oven using extra cell
Hi everyone, I’m trying to use TOUGH2 to history match a column test where some soil was put inside a glass column and sealed and then put the column itself inside an oven set at some elevated…
-
Issue with using EXT for extracting data from TOUGH2 MESH and OUTPUT files
I have compiled and linked the EXT fortran source codes downloaded at: https://tough.lbl.gov/licensing-download/free-software-download/. I received the following error messages when using the…
-
How to conduct a both saturated and unsaturated analysis in a computational domain?
Hi! Recently, I have been focusing on simulating the evaporation of moisture at a cavity surface to see the desaturated process near the cavity surface using TOUTGH2(EOS3).…
-
How to print K(LIQ) and K(GAS)
Hi everyone, I am using TOUGH2- ECO2N, and I would like to print the gas and liquid phase relative permeabilities. I checked in the manual, but I did not find the answer.…
-
Atmospheric boundary condition with evaporation
Hi all, Recently I'm trying to build an simple model for rainfall filtration in vadose zone with TOUGH2 EOS3. I have read Anthony and Stefan's discussions on this topic four years ago,…
-
Temperatures above initial condition temp using injection and production scenario with EOS1
Hello, I am modelling the flow of water through heterogeneous media by using two wells, an injector and producer over a 25 year period. The initial temperature condition is set to 100 degrees C and…
-
Link to Training Material is not working
The link to training material on TOUGH Short Courses website is not working, it would be really helpful if someone could fix this. Thanks!
-
Executable or Source code?
Hello everyone, I copy and paste this question from THOUGHREACT Forum because some people may also can help me with this basic issue. In the upcoming days,…
-
Set An Initial Temperature Greater Than 100 In ECO2N Module
Dear all members, Hi, I am a new TOUGH user and I know that by default, ECO2N has limitations on maximum allowed temperature (103.04 deg. C). But in my case the temperature is 120 deg.…
-
Ask : MP function at petrasim 2018
Hello everyone.. im a college student & new petrasim-tough2 user i want to ask how to activated MP function when we want to running model using petrasim 2018?…
-
How to apply this unique Mix of Neuman + Dirichlet Boundary conditions, for Temperature & Pressure, 1-d Problem
Hello everyone I am trying to setup a 1-D validation problem from a research paper for validating experimental results. In short, I need to apply Neuman & Dirichlet Boundary conditions,…
-
Hysteretic RELP and CAP
Hi, Just a quick question: Is it possible to use IPR 12 with ICP 9 ? Following the manual, it should only be implemented with ICP 12, since ICP 12 uses some parameters from IPR 12,…
-
Partitioning Tracer-EOS7C
Hi, I have two question 1- Regarding temperature dependency of Henry's coefficient, I was wondering if TOUGH2/EOS7C considers this or not? and if yes, at what reference temperature should HCTRC…
-
Difficulty in Understanding Mesh creation
Here are the contents of Meshmaker (This makes a radial grid with radius 224m and depth 10m, RZ2DL RADII 3 0.0e00 5.0e-2 7.0e-2 LOGAR 30 1.0e2 7.0e-2 RADII 1 5.001e2 LAYER 1 1.…
-
WellModel - ftype
Hi everyone, has anyone coupled the Wellsim wellbore simulator to tough2? as a f-type generator for example?
-
Pressure-dependent Neumann Boundary condition
Dear all, Dose anyone know how to set up a pressure-dependent Neumann Boundary condition in TOUGH2? Like evaporation problem, how can I set up the evaporation amount (in GENER block) as a function…
-
How to inject CO2 using eos2
Hi. I want to inject CO2 of 1000 ton/day and H2O of 2400 ton/day into model domain (1.5* 10 km) using EOS2. Following advice in https://tough.forumbee.…
-
Recharge via time-dependent Neumann & deliverability boundaries in EOS9
Hello, I am trying to model recharge to a shallow aquifer using a 20 m-deep 1-D (1 m x 1m cross-section) iTOUGH2-EOS9 model in which I incorporate the following processes:…