-
Tough2-FLAC 3D
Hello guys . I need help . I am trying to convert the coordinates (x,y,z) in tough2 output files into nodes of FLAC 3D. I came across FLAC2TOUGH but this matlab code convert FLAC 3D data into tough2…
-
toughio
Dears, I want to read the file SAVE output from tough+hydrate through the toughio library, but the code runs all the time and fails. How can I solve this problem? Thanks in advance
-
Material balance in TOUGH-FLAC
Hello, I have a question regarding the material balance in TOUGH-FLAC coupling. Let's say that I originally had a porosity obtained from TOUGH as 0.3, and then after the FLAC calculation,…
-
How can I add a free-flow Neumann boundary condition to a boundary?
I understand that IFD framework has no-flow BC by default. I am trying to set up a 3D problem where all the boundaries except the top have no-flow BCs.…
-
The pressure initialization presents a gradient distribution, but the temperature gradient disappears.
Hello everyone, I have a question. The pressure initialization presents a gradient distribution, but the temperature gradient disappears. The SAVE file shows that the temperature result is a constant…
-
Asking for some basic training cases for TOUGH2/ECO2N model
Hello everyone, I'm a new learner of TOUGH2 for CCS project. I'm looking for some basic training case except from ECO2N Manual. I wonder if anyone could help me for this.
-
Which package is suitable for geochemical and geo-mechanical study of CO2 sequestration?
Which software package will be most suitable for studying the geochemical and geo-mechanical aspects of CO2 sequestration in saline aquifers and depleted hydrocarbon reservoirs?
-
1D advection-diffusion problem ( velocity input)
I am using PetraSim 2018 so I can use only TOUGH (not TOUGH2) and TOUGHRECAT I try to solve 1D advection-diffusion problem where water velocity is require as an input value Please suggest me how…
-
How to run the example "co2 leakage along a fault" with tough3-eos2?
Hi everyone, I am new to tough3 and I started with the given example "co2 leakage along a fault". I Created the INFILE, MESH and INCON but when I run Tough3, I get the following Error.…
-
How to define the characteristic length (lc) for the extruded mesh?
Dear Community, Using TOIGHIO, this code extrudes a 2D mesh into a 3D mesh along the y-axis. mesh.points[:, [1, 2]] = mesh.points[:, [2, 1]] mesh.extrude_to_3d(height=100, axis=1,…
-
I want to install TOUGH3
Hello, I am a student planning to analyze rock minerals. I would like to install TOUGH3 for the analysis. Please how do I get the software? Thanks. Efenwengbe Nicholas Aminaho
-
TReactMech Simulator!
Hello, I am working on CCS research. I am wondering if the TReactMech simulator is available. I have seen it in papers, but can't find it the on LBNL marketplace. Please advise! Thanks. Nicholas
-
TREACTMECH Short Course
Hi, I was just wondering whether there was any additional information about TREACTMECH other than that available on http://esd1.lbl.gov/research/projects/tough/events/training/. i.e.…
-
Training
Hi all, Is there any training in UK or online for beginners as I need to get to use Tough2 and add Flac3d to it later
-
Best approach to modelling multiphase fluid flow of clay fines in a saturated silty sand media
Hi All, Is there a program within the TOUGH family that is suitable for modelling slurry injection within a saturated silty sand media. Kind regards, Rob
-
Proppant transport
Dear all, what is the best way to simulate proppant transport in Tough2 or 3? Thanks, P.
-
MeshMaker-Eleme Name Missing when Num of Het.Layer>200
Hi Dear All, I am trying to generate meshes by using meshmaker v.1.5. When the number of heterogeneous layers is more than 200, the name of elements disappears and 1 was written instead.…
-
TOUGH2-MP : simulations halted after 1 day simulations
Hi every body, I'm using TOUGH2-MP version 2.01 Under Linux (Debian). I've did some changes in the code and compile it without any problem (named later as testv2.1).…
-
A question about coupling TOUGH2 and FLAC3D
I have read many articles about coupling TOUGH2 and FLAC3D, most of them said FLAC can calculation the effective stress and strain after reading the data from TOUGH such as pore-pressure.…
-
How to run or compile any code in Tough+Hydrate?
Hi! I am a beginner, recently my college has bought Tough+Hydrate. As I started to learn this software, I got stuck at the very first step. I thought to run the solved examples available,…
-
How to install TOUGH3 on Window OS?
Dear guys, can any one help me how to install and run TOUGH3 on Windows or UBUNTU system? I am totally new for TOUGH but I have idea its purpose. I have the excutable files but don´t know how to…
-
Changes of hydraulic conductivity driven by effective stress
Hello, Does TOUGH have a simulator with geomechanics capabilities? I am specially interested in changes of hydraulic conductivity driven by effective stress.…
-
Trapping CO2 in ECO2N
Dear All, I am working on CO2 storage using ECO2N. In the output file, we have "P T SG SS XNACL YH2OG XCO2aq PCAP k-red" How can I calculate the residual trapping CO2 saturation and solubility…
-
TOUGH Workshop 2021
Is tough training planned this year?
Have a question about TOUGH? Ask it here. Or post a reply and share your knowledge.