-
Material balance in TOUGH-FLAC
Hello, I have a question regarding the material balance in TOUGH-FLAC coupling. Let's say that I originally had a porosity obtained from TOUGH as 0.3, and then after the FLAC calculation,…
-
GSLIB+Anisotropy permeability
Hi, I am trying to create a permeability realization field using GSLIB in iTOUGH2. I set permeability in 3 directions in ROCKS, with an anisotropy ratio of 3 in GSLIB block.…
-
Unable to download BLAS when installing TOUGH3 on a Linux platform
An error of failing download BLAS consistently happened when I was trying to install TOUGH2 on a Linux platform. The err.log said ' downloading 'http://www.netlib.org/blas/blas2.1.tgz' failed'.…
-
CO2TAB in ECO2N
Hello to everyone ! I would like to model CO2 injection into high temperature and high pressure EGS reservoir. I know that by default, ECO2N has limitations on maximum allowed temperature throught…
-
Asking for some basic training cases for TOUGH2/ECO2N model
Hello everyone, I'm a new learner of TOUGH2 for CCS project. I'm looking for some basic training case except from ECO2N Manual. I wonder if anyone could help me for this.
-
TOUGH2-MP : simulations halted after 1 day simulations
Hi every body, I'm using TOUGH2-MP version 2.01 Under Linux (Debian). I've did some changes in the code and compile it without any problem (named later as testv2.1).…
-
TOUGH Workshop 2021
Is tough training planned this year?
-
About TOUGH+HYDRATE
Hello, I have a question about TOUGH+HYDRATE(T+H). I want to run cartesian model(gird : 57x57x61(total about 200000). But T+H doesn't operate, and I get the following error message on the terminal:…
-
I want to install TOUGH3
Hello, I am a student planning to analyze rock minerals. I would like to install TOUGH3 for the analysis. Please how do I get the software? Thanks. Efenwengbe Nicholas Aminaho
-
toughio
Dears, I want to read the file SAVE output from tough+hydrate through the toughio library, but the code runs all the time and fails. How can I solve this problem? Thanks in advance
-
I can run TOUGH3 on RedHat Linux
Hi, I have the executables for windows and mac. However, the memory of my computer is not enough to perform the simulation I am working on, they granted me access to a Cluster with RedHat Linux.…
-
1D advection-diffusion problem ( velocity input)
I am using PetraSim 2018 so I can use only TOUGH (not TOUGH2) and TOUGHRECAT I try to solve 1D advection-diffusion problem where water velocity is require as an input value Please suggest me how…
-
Flow vs Time data from output
Hello everyone! I am a relatively new user of TOUGH3 software. I am using the software to model methane gas migration through soils. I wanted to get the FLOW data of NCG with respect to time.…
-
Question about Run-time Error
Hi everyone, I am trying to make simulation model for hydrate production with depressurization method using TOUGH+HYDRATE. However, I got an error message as shown in the attached picture.…
-
Heat Conductivity and Specific Heat
Regarding the magnitudes of these 2 parameters in the ROCKS section, I have not figured out what they exactly represent. For example, If I have a 30% sandstone,…
-
MeshMaker-Eleme Name Missing when Num of Het.Layer>200
Hi Dear All, I am trying to generate meshes by using meshmaker v.1.5. When the number of heterogeneous layers is more than 200, the name of elements disappears and 1 was written instead.…
-
Training
Hi all, Is there any training in UK or online for beginners as I need to get to use Tough2 and add Flac3d to it later
-
MOP(7)=9
Hi, I am putting MOP7=9, which gives me a full printout of Permeabilities in 3 directions, but I would like to have them beside the other parameters (lets say beside the porosity column).…
-
Which package is suitable for geochemical and geo-mechanical study of CO2 sequestration?
Which software package will be most suitable for studying the geochemical and geo-mechanical aspects of CO2 sequestration in saline aquifers and depleted hydrocarbon reservoirs?
-
Changes of hydraulic conductivity driven by effective stress
Hello, Does TOUGH have a simulator with geomechanics capabilities? I am specially interested in changes of hydraulic conductivity driven by effective stress.…
-
bounds with different temperatures
Hi, I'm new using TOUGH 3 I would like to know how to define a model in EOS1 with two bounds with different temperature each.
-
Model "Air" in TOUGH
Hi all.. Can someone please tell me whether it is possible to model “Air” in TOUGH? Like for instance, I have a (1m) height tank (closed at top) filled with waste (0.8m) which is emitting methane.…
-
AMD + AOCC/Flang
Hello all Does anyone have experience, and is willing to share, compiling any of the TOUGH codes on the latest AMD processors using the native compiler suite?
-
TReactMech Simulator!
Hello, I am working on CCS research. I am wondering if the TReactMech simulator is available. I have seen it in papers, but can't find it the on LBNL marketplace. Please advise! Thanks. Nicholas
-
Best approach to modelling multiphase fluid flow of clay fines in a saturated silty sand media
Hi All, Is there a program within the TOUGH family that is suitable for modelling slurry injection within a saturated silty sand media. Kind regards, Rob
Have a question about TOUGH? Ask it here. Or post a reply and share your knowledge.